icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
025-0767-001

RP CONDUCTIVE D/C 34 SHELL

025-1157-001

RP BKAD 2&3 A&B RCPT DUST CAP

DL5 HANDLE

HANDLE FOR DL5 DLM5 & DLP408

025-0852-000

DL1-P-D/C

1469374-1

GUIDE MODULE FEMALE RT ANGLE

025-1122-001

RP DUST CAP BKAD 1 C PLUG

4-1469268-2

ATCA GUIDE MODULE RA FEMALE

64623

2MM HM B19 SHROUD 15.75MM

5223985-9

UPM KEYED GUIDE PIN

5223979-1

CONN GUIDE MODULE RT ANG

114427

2MM HM AB22 SHROUD 15.75MM

1-1410773-2

CONN GUIDE PIN 2.6 NICKEL

990-0019-062

RP #4 LOCK WASHER A101 STEEL

1-1469492-3

MOD KEY GUIDE 90DEG VITA46

171082-1

GUIDE PIN 4-40

980-0009-223

RP FLOAT MT SCREW 4-40X1/4

10037911-104LF

10.8MM GUIDE PIN INT THR

8MQ2B1M2630A

MQUICK COMPOSITE CABLE TIE BACKS

374219

PREALIGN MDL W ELEC GDBSH KIT

8MQ2A1E25

MQUICK PANEL GASKET

144128

PREALIGN MDL GD BSH KIT

201182-4

CONN STRAIN RELIEF 50POS SHORT

025-4506-000

DUST CAP DL1-156R

2294865-1

STRADA WHISPER TEST KIT 3.9

About Backplane Connector Accessories

The Backplane Connector Accessories range covers multi-contact connections between circuit boards and equipment backplanes.

Compare connector standard, contact layout, row spacing and board alignment for the required installation. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.

Review Accessory Type, For Use With/Related Products and Specifications on the individual product page before choosing a part.

Backplane Connector Accessories

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Rack backplanes

Rack backplanes

Backplane Connector Accessories can be evaluated for rack backplanes. Match connector standard, contact layout, row spacing and board alignment to the equipment interface.

Board integration

Board integration

For board integration, verify Accessory Type, For Use With/Related Products and Specifications on the selected Backplane Connector Accessories. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.

Prototype verification

Prototype verification

In prototype verification, allow for the required mounting, routing or termination space. Check connector standard, contact layout, row spacing and board alignment before assembly.

Backplane Connector Accessories inspection

Backplane Connector Accessories inspection

For backplane connector accessories inspection, identify the original Backplane Connector Accessories part number and mating arrangement. Compare Accessory Type, For Use With/Related Products and Specifications before substitution.

HM2LS25A8LF configuration vs. 1061052200 configuration

Compare the interfaces, construction and selection details of these two product options.

HM2LS25A8LF configuration

Example: HM2LS25A8LF

  • Accessory Type Shield

1061052200 configuration

Example: 1061052200

  • Accessory Type Adapter

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Backplane Connector Accessories include?

This category covers multi-contact connections between circuit boards and equipment backplanes. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.

Examples in this category include Shield, Adapter and Shroud. Match the selected Backplane Connector Accessories to the required connector standard, contact layout, row spacing and board alignment.

For Backplane Connector Accessories, check Accessory Type, For Use With/Related Products and Specifications against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check connector standard, contact layout, row spacing and board alignment for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory. For Backplane Connector Accessories, identify the matching system and required assembly parts before ordering.

HM2LS25A8LF specifies Accessory Type: Shield. 1061052200 specifies Accessory Type: Adapter. Check the full mating and installation requirements before treating different Backplane Connector Accessories as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include connector standard, contact layout, row spacing and board alignment and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details