IC evaluation
Socket Adapters can be evaluated for ic evaluation. Match IC package, source and target pin patterns, pitch and board clearance to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 1109252 | SOCKET ADAPTER PLCC TO 28DIP 0.6 |
| 28-354000-21-RC | SOCKET ADAPTER DIP TO 28SOIC |
| 16-350000-10-HT | SOCKET ADAPTER SOIC TO 16DIP 0.3 |
| 20-354W00-10 | CONN ADAPTER 20PIN DIP TO SOWIC |
| 84-653000-11-RC | SOCKET ADAPTER PLCC TO 84DIP 0.6 |
| 96-160M65 | SOCKET ADAPTER QFP TO 160PGA |
| 95-132I25 | SOCKET ADAPTER QFP TO 132PGA |
| 44-305263-20 | SOCKET ADAPTER QFP TO 44PLCC |
| 95-100I25 | SOCKET ADAPTER QFP TO 100PGA |
| 52-505-110 | SOCKET ADAPTER PLCC TO 52PGA |
| 14-354W00-10 | CONN ADAPTER 14PIN DIP TO SOWIC |
| 97-68340 | SOCKET ADAPTER QFP TO 144PGA |
| 96-080M80 | SOCKET ADAPTER QFP TO 80PGA |
| 97-68340-P | ADAPTER/PANEL QFP TO PGA 144POS |
| 1110087 | CONN ADAPTER 144FQFP TO PGA |
| 56-184M65 | SOCKET ADAPTER QFP TO 184PGA |
| 96-100M65 | SOCKET ADAPTER QFP TO 100PGA |
| 97-56001 | SOCKET ADAPTER QFP TO 169PGA |
| MIKROE-230 | SOCKET ADAPTER AT90PWM1 TO 40DIP |
| 218-3341-09-0602J | SOCKET ADAPTER 18DIP TO 18DIP |
| 96-128M80 | QFP TO PGA 128 PIN |
| 84-653000-10 | SOCKET ADAPTER PLCC TO 84DIP 0.6 |
| 44-653000-10 | SOCKET ADAPTER PLCC TO 44DIP 0.6 |
| 44-647-10 | SOCKET ADAPTER SOIC TO 44DIP 0.6 |
The Socket Adapters range covers adapter interfaces between the specified electronic socket footprints.
Compare IC package, source and target pin patterns, pitch and board clearance for the required installation. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.
Review Convert From (Adapter End), Convert To (Adapter End), Number of Pins, Pitch - Mating and Contact Finish - Mating on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Socket Adapters can be evaluated for ic evaluation. Match IC package, source and target pin patterns, pitch and board clearance to the equipment interface.
For circuit prototyping, verify Convert From (Adapter End), Convert To (Adapter End), Number of Pins, Pitch - Mating and Contact Finish - Mating on the selected Socket Adapters. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.
In package adaptation, allow for the required mounting, routing or termination space. Check IC package, source and target pin patterns, pitch and board clearance before assembly.
For socket adapters inspection, identify the original Socket Adapters part number and mating arrangement. Compare Convert From (Adapter End), Convert To (Adapter End), Number of Pins, Pitch - Mating and Contact Finish - Mating before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: DS9075-40V/NO-BRAND
Example: 242-1281-29-0602J
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers adapter interfaces between the specified electronic socket footprints. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.
Examples in this category include 0.100" (2.54mm) and 0.070" (1.78mm). Match the selected Socket Adapters to the required IC package, source and target pin patterns, pitch and board clearance.
For Socket Adapters, check Convert From (Adapter End), Convert To (Adapter End), Number of Pins, Pitch - Mating and Contact Finish - Mating against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check IC package, source and target pin patterns, pitch and board clearance for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion. For Socket Adapters, identify the matching system and required assembly parts before ordering.
DS9075-40V/NO-BRAND specifies Convert From (Adapter End): SIP and Convert To (Adapter End): DIP. 242-1281-29-0602J specifies Convert From (Adapter End): DIP, 0.6" (15.24mm) Row Spacing and Convert To (Adapter End): DIP, 0.6" (15.24mm) Row Spacing. Check the full mating and installation requirements before treating different Socket Adapters as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include IC package, source and target pin patterns, pitch and board clearance and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details