Wiring assembly
Terminal Adapters can be evaluated for wiring assembly. Match terminal family, wire range, mating geometry and retention to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 73085-0 | CONN ADPT MALE 10-32 TO JACK |
| 73088-6 | CONN ADPT MALE 8-32 TO JACK |
| D-250A-C | CONN ADPT 0.25 TABS TO 0.25 RCPT |
| 73084-0 | CONN ADPT MALE 6-32 TO JACK |
| 180909 | CONN ADPT 0.25 TABS TO 0.25 TABS |
| 73085-2 | CONN ADPT MALE 10-32 TO JACK |
| 191630070 | CONN ADPT FT FL SN/B |
| 73084-4 | CONN ADPT MALE 6-32 TO JACK |
| 1217344-1 | CONN ADPT 0.25 TABS TO 0.25 RCPT |
| 157431-2 | CONN ADPT 0.25 TABS TO 0.187 TAB |
| 73084-6 | CONN ADPT MALE 6-32 TO JACK |
| MA250DMMFX-BOTTLE | CONN ADPT.25TABS TO .25RCPT 50PC |
| 826708-1 | CONN ADPT 0.25 RCPT TO SLDR POST |
| 73085-4 | CONN ADPT MALE 10-32 TO JACK |
| 191630178 | CONN ADPT 0.25 TAB TO 0.25 TAB |
| 157727-2 | CONN ADPT 0.187 TAB TO 0.25 TABS |
| 1-321235-3 | CONN ADPT 0.25 TAB TO 0.25 TAB |
| 901-BOX | CONN ADPT TAP TO BARREL 1=50/BOX |
| 8-321235-5 | CONN ADPT 0.25 TAB TO 0.25 TAB |
| 190430009 | CONN ADPT .187 TABS TO .187 RCPT |
| D-250A-M | CONN ADPT 0.25 TABS TO 0.25 RCPT |
| 16305724 | TAB ADAPTER VWA0 |
| 191630063 | CONN ADPT FTSLSL SN/B |
| 73088-0 | CONN ADPT MALE 8-32 TO JACK |
The Terminal Adapters range covers parts supporting compatible wire termination systems.
Compare terminal family, wire range, mating geometry and retention for the required installation. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.
Review Convert From (Adapter End), Convert To (Adapter End), Insulation, Contact Material and Contact Finish on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Terminal Adapters can be evaluated for wiring assembly. Match terminal family, wire range, mating geometry and retention to the equipment interface.
For equipment panels, verify Convert From (Adapter End), Convert To (Adapter End), Insulation, Contact Material and Contact Finish on the selected Terminal Adapters. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.
In termination inspection, allow for the required mounting, routing or termination space. Check terminal family, wire range, mating geometry and retention before assembly.
For terminal adapters inspection, identify the original Terminal Adapters part number and mating arrangement. Compare Convert From (Adapter End), Convert To (Adapter End), Insulation, Contact Material and Contact Finish before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 901-BULK
Example: 17-6-250
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers parts supporting compatible wire termination systems. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.
Examples in this category include Inline Splice, Tap, 0.25" (6.35mm) 1/4" Quick Connect, Male and 0.25" (6.35mm) 1/4" Quick Connect, Male (2). Match the selected Terminal Adapters to the required terminal family, wire range, mating geometry and retention.
For Terminal Adapters, check Convert From (Adapter End), Convert To (Adapter End), Insulation, Contact Material and Contact Finish against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check terminal family, wire range, mating geometry and retention for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion. For Terminal Adapters, identify the matching system and required assembly parts before ordering.
901-BULK specifies Convert From (Adapter End): Inline Splice, Tap and Convert To (Adapter End): Barrel, Female. 17-6-250 specifies Convert From (Adapter End): 0.25" (6.35mm) 1/4" Quick Connect, Male and Convert To (Adapter End): Ring Terminal. Check the full mating and installation requirements before treating different Terminal Adapters as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include terminal family, wire range, mating geometry and retention and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details