icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
1-321235-1

CONN ADPT 0.25 TAB TO 0.25 TAB

1-321235-0

CONN ADPT 0.25 TAB TO 0.25 TAB

W2334-00

CONN ADPT TURRET M3 TO FEMALE M3

MA250DM/8RRK

CONN ADPT 0.25 TAB TO TERM

MA250DMMFK

CONN ADPT 0.25 TABS TO 0.25 RCPT

MA250DMFMK-A

CONN ADPT 0.25 TABS TO 0.25 RCPT

MA250DMFMK

CONN ADPT 0.25 TABS TO 0.25 RCPT

77-250-A

NON INSUL BUTT SEAM MULTI STACK

17-10-250

CONN ADPT 0.25 TAB TO TERM

MA250DM/10RRK

CONN ADPT 0.25 TAB TO TERM

7MMF-250

CONN ADPT 0.25 TABS TO 0.25 RCPT

MA250DM/6RRK

CONN ADPT 0.25 TAB TO TERM

17-8-250

CONN ADPT 0.25 TAB TO TERM

17-6-250

CONN ADPT 0.25 TAB TO TERM

901-BULK

CONN ADPT TAP TO BARREL

About Terminal Adapters

The Terminal Adapters range covers parts supporting compatible wire termination systems.

Compare terminal family, wire range, mating geometry and retention for the required installation. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Review Convert From (Adapter End), Convert To (Adapter End), Insulation, Contact Material and Contact Finish on the individual product page before choosing a part.

Terminal Adapters

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Wiring assembly

Wiring assembly

Terminal Adapters can be evaluated for wiring assembly. Match terminal family, wire range, mating geometry and retention to the equipment interface.

Equipment panels

Equipment panels

For equipment panels, verify Convert From (Adapter End), Convert To (Adapter End), Insulation, Contact Material and Contact Finish on the selected Terminal Adapters. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Termination inspection

Termination inspection

In termination inspection, allow for the required mounting, routing or termination space. Check terminal family, wire range, mating geometry and retention before assembly.

Terminal Adapters inspection

Terminal Adapters inspection

For terminal adapters inspection, identify the original Terminal Adapters part number and mating arrangement. Compare Convert From (Adapter End), Convert To (Adapter End), Insulation, Contact Material and Contact Finish before substitution.

901-BULK configuration vs. 17-6-250 configuration

Compare the interfaces, construction and selection details of these two product options.

901-BULK configuration

Example: 901-BULK

  • Convert From (Adapter End) Inline Splice, Tap
  • Convert To (Adapter End) Barrel, Female
  • Insulation Fully Insulated
  • Contact Material Copper Alloy
  • Contact Finish Tin
  • Color Black

17-6-250 configuration

Example: 17-6-250

  • Convert From (Adapter End) 0.25" (6.35mm) 1/4" Quick Connect, Male
  • Convert To (Adapter End) Ring Terminal
  • Insulation Non-Insulated
  • Contact Material Copper, ETP
  • Contact Finish Tin

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Terminal Adapters include?

This category covers parts supporting compatible wire termination systems. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Examples in this category include Inline Splice, Tap, 0.25" (6.35mm) 1/4" Quick Connect, Male and 0.25" (6.35mm) 1/4" Quick Connect, Male (2). Match the selected Terminal Adapters to the required terminal family, wire range, mating geometry and retention.

For Terminal Adapters, check Convert From (Adapter End), Convert To (Adapter End), Insulation, Contact Material and Contact Finish against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check terminal family, wire range, mating geometry and retention for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion. For Terminal Adapters, identify the matching system and required assembly parts before ordering.

901-BULK specifies Convert From (Adapter End): Inline Splice, Tap and Convert To (Adapter End): Barrel, Female. 17-6-250 specifies Convert From (Adapter End): 0.25" (6.35mm) 1/4" Quick Connect, Male and Convert To (Adapter End): Ring Terminal. Check the full mating and installation requirements before treating different Terminal Adapters as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include terminal family, wire range, mating geometry and retention and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details