Host-side USB connections
Connect the USB side of a compatible conversion cable to the host. Confirm chipset and driver support as well as the target serial signal level.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| USB2-RS232TS-10 | USB-A to RS232, Thumbscrews 10' |
| USB2-RS232WN-10 | USB-A to RS232 Serial, Nuts 10' |
| PSX-UART-USB | UART-USB CABLE |
| USB2-RS232WN-06 | USB-A to RS232 Serial, Nuts, 6' |
| USBC-RS232NUT-06 | USB-C to RS232 Serial, Nuts, 6' |
| USB2-RS232TS-06 | USB-A to RS232, Thumbscrews, 6' |
| USB2-RS232TS-03 | USB-A to RS232, Thumbscrews, 3' |
| AC-USB-RS485-02 | CONVERTER CABLE USB TO RS485 (2 |
| AC-USB-RS485-03 | CONVERTER CABLE USB TO RS485 (R |
| USBC-RS232SCW-06 | USB-C to RS232, Thumbscrews, 6' |
| USBC-RS232SCW-03 | USB-C to RS232, Thumbscrews, 3' |
| USB2-RS232WN-03 | USB-A to RS232 Serial, Nuts, 3' |
| AC-USB-RS232-01 | CONVERTER CABLE USB TO RS232 |
| DBM-9FUM-03BLK | USB-A M TO DB9M RS232 SHLD CABLE |
| USBC-RS232NUT-03 | USB-C to RS232 Serial, Nuts, 3' |
| U2-AFWC-10 | USB 2 A F CBL TO LEAD WIRES 10FT |
| AC102012-1 | CABLE COMM TO USB-A 8POS 6' |
| USB-SERIAL-F | OLINUXINO SERIAL CONSOLE CABLE |
| 310-035 | USB TO SERIAL ADAPTER CABLE |
| 10153509-Z0200YYLF | MTF-USB & UART CA |
| U206-006-R | ADAPTER USB - IEEE PARALLEL 6' |
| USBC-HS-UART-5V-3.3V-1800-SPR | CABLE USB TO UART 1.8M |
| U209-005-C | USB 2.0 USB-C TO DB-9 ADAPTER CA |
| US232R-10-BULK | CABLE USB RS232 EMBEDED 10CM LED |
Smart Interface Cables includes interface cables incorporating signal or serial conversion.
When selecting an assembly, check conversion function, logic level, connector pinout, chipset and host software.
USB-to-RS232 and USB-to-TTL serial cables are not interchangeable. Match signal levels and pin assignments, including any power conductor, to the target equipment.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Connect the USB side of a compatible conversion cable to the host. Confirm chipset and driver support as well as the target serial signal level.
Match logic levels and ground reference; TTL and RS232 are not interchangeable.
Check the supported chipset, host software and controller interface.
Identify the exact signal conversion and any power conductor before substitution.
Compare the interfaces, construction and selection details of these two product options.
Representative listed part: DA-70119-R.
Representative listed part: TTL-234X-3V3-WE.
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
Choose the Usage entry that matches the equipment interface and confirm the documented signal levels and wiring. The category includes different conversion functions, so the USB plug alone does not identify the required cable.
Match the exact listed Usage with the target equipment documentation and confirm the signal and power connections. Do not choose from wire colours or assume different voltage variants are interchangeable.
Specify the operating system and equipment interface, then request the relevant driver, converter and pinout information for the exact part. Those details should be confirmed if they are absent from the product attributes.
USB-to-RS232 and USB-to-TTL serial cables are not interchangeable. Match signal levels and pin assignments, including any power conductor, to the target equipment.
DA-70119-R is shown as usb to rs232 conversion, with Usage listed as USB to RS232. TTL-234X-3V3-WE is shown as usb to 3.3v ttl serial conversion, with Usage listed as USB to TTL Serial 3.3V. These are two examples, not a statement that every part has either specification.
Provide the original manufacturer and complete part number, or a drawing. For this range, compare conversion function, logic level, connector pinout, chipset and host software. Identify any requirement not covered by the listing rather than selecting only by length or appearance.
Supply a mating-interface drawing and the required conversion function, logic level, connector pinout, chipset and host software. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details