icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
USBC-HS-UART-3.3V-3.3V-1800-SPR

CABLE USB TO UART 1.8M

USBC-FS-UART-5V-3.3V-1800-PH

CABLE USB TO TTL SER 3.3V 1.8M

USBC-FS-RS232-100-DB9

USB TO RS232 100MM

USBC-FS-UART-5V-5V-1800-WE

CABLE USB TO TTL SERIAL 5V 1.8M

USBC-HS-MPSSE-3.3V-3.3V-500-SPR

CABLE USB TO MPSSE 500MM

USBC-HS-MPSSE-5V-3.3V-500-SPR

CABLE USB TO MPSSE 500MM

USBC-FS-RS232-0V-1800-WE

CABLE USB TO RS232 1.8M

NB-RSEXT-2M

NB HMI RS-422 COMM CABLE 2M

USB-RS485-WE-5000-BT

CABLE USB RS485 WIRE END 5M

C232HM-DDHSL-0

CABLE USB HS I2C/JTAG 3.3V

TTL-232R-3V3-WE

CABLE USB EMBD UART 3.3V WIRED

USB-RS232-WE-5000-BT_0.0

CABLE USB RS232 WIRE END 5M

TTL-234X-5V-WE

CABLE USB TO UART 5V WIRE

USB-RS422-WE-5000-BT

CABLE USB RS422 WIRE END 5M

TTL-234X-3V3-2MM

CABLE USB TO UART 3.3V 2MM CONN

UC232R-10-NE

CABLE USB RS232 NO ENCLOSRE 10CM

US232B/LC-BLISTER

CABLE USB RS232 10CM

C232HM-EDHSL-0

CABLE USB HS I2C/JTAG 5V .5M

TTL-234X-5V

CABLE USB TO UART 5V .1" CONN

TTL-232R-3V3-AJ

CABLE USB SERIAL 3.3V 3.5MM PLUG

C232HD-EDHSP-0

CABLE USB HS UART 5V, 1.8M

UT232R-200

CABLE USB RS232 W/THUMB SCREW 2M

TTL-232R-3V3-2MM

CABLE USB SERIAL 3.3V 2MM HEADER

C232HD-DDHSP-0

CABLE USB HS UART 3.3V, 1.8M

About Smart Cables

Smart Interface Cables includes interface cables incorporating signal or serial conversion.

When selecting an assembly, check conversion function, logic level, connector pinout, chipset and host software.

USB-to-RS232 and USB-to-TTL serial cables are not interchangeable. Match signal levels and pin assignments, including any power conductor, to the target equipment.

Smart Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Host-side USB connections

Host-side USB connections

Connect the USB side of a compatible conversion cable to the host. Confirm chipset and driver support as well as the target serial signal level.

Embedded debug access

Embedded debug access

Match logic levels and ground reference; TTL and RS232 are not interchangeable.

Controller commissioning

Controller commissioning

Check the supported chipset, host software and controller interface.

Conversion cable identification

Conversion cable identification

Identify the exact signal conversion and any power conductor before substitution.

USB to RS232 conversion vs. USB to 3.3V TTL serial conversion

Compare the interfaces, construction and selection details of these two product options.

USB to RS232 conversion

Representative listed part: DA-70119-R.

  • Usage USB to RS232
  • Convert From (Adapter End) USB-A (USB TYPE-A), Plug
  • Convert To (Adapter End) D-Sub, 9 Pin Male
  • Shielding Shielded
  • Length 5.90' (1.80m)

USB to 3.3V TTL serial conversion

Representative listed part: TTL-234X-3V3-WE.

  • Usage USB to TTL Serial 3.3V
  • Convert From (Adapter End) USB-A (USB TYPE-A), Plug
  • Convert To (Adapter End) Cable, 6 Wire Leads
  • Shielding Unshielded
  • Length 5.90' (1.80m)

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

Do I need USB-to-RS232 or USB-to-TTL serial conversion?

Choose the Usage entry that matches the equipment interface and confirm the documented signal levels and wiring. The category includes different conversion functions, so the USB plug alone does not identify the required cable.

Match the exact listed Usage with the target equipment documentation and confirm the signal and power connections. Do not choose from wire colours or assume different voltage variants are interchangeable.

Specify the operating system and equipment interface, then request the relevant driver, converter and pinout information for the exact part. Those details should be confirmed if they are absent from the product attributes.

USB-to-RS232 and USB-to-TTL serial cables are not interchangeable. Match signal levels and pin assignments, including any power conductor, to the target equipment.

DA-70119-R is shown as usb to rs232 conversion, with Usage listed as USB to RS232. TTL-234X-3V3-WE is shown as usb to 3.3v ttl serial conversion, with Usage listed as USB to TTL Serial 3.3V. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare conversion function, logic level, connector pinout, chipset and host software. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required conversion function, logic level, connector pinout, chipset and host software. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details