icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer
Consumer Electronics icon CONSUMER ELECTRONICS IN THE FIELD

Key Application Requirements

  • Volume cost pressure
  • Frequent design updates
  • Cosmetic consistency

How we solve it

Coordinate component selection, termination, molded geometry and production checks throughout the product ramp.

Typical Applications

Explore example applications. Final cable and harness specifications are defined by your drawing and operating conditions.

Display module FFC/FPC 01
Typical Application

Display module FFC/FPC

Display module FFC and FPC assemblies connect the display to the host electronics while fitting within thin product housings. Define pitch, contact orientation, stiffeners and the permitted folding route with the mechanical design. Review insertion access, handling and any repeated movement, then evaluate samples against the display interface and assembly process before approving the production configuration for a product generation.

Discuss this application
Battery & charging leads 02
Typical Application

Battery & charging leads

Battery and charging leads carry power between the battery, charging interface and device electronics. Confirm conductor requirements, polarity, connector retention and protective features against the circuit design. Review strain relief and insulation around the installation route, with clear identification to support assembly, and agree the inspection and electrical checks appropriate to the finished lead and intended device.

Discuss this application
Internal device cables 03
Typical Application

Internal device cables

Internal device cables connect boards, controls and peripheral modules within the finished product. Defined lengths, connector orientation and branch identification help the wiring follow the intended assembly sequence. Review clearance around fasteners, covers and moving parts, along with support near terminations, and maintain the approved pinout and component configuration as product revisions and production quantities change.

Discuss this application
Overmolded accessories 04
Typical Application

Overmolded accessories

Overmolded accessories combine the cable, termination and molded protection into an assembly designed around the product interface. Specify external dimensions, exit direction, appearance requirements and expected handling loads before tooling review. Material selection and strain relief geometry should suit the application, and any sealing or durability requirement should be evaluated on the complete assembly using an agreed verification method.

Discuss this application

Discuss Your Application Requirements

Send a drawing, BOM, sample or application description. We will review the requirements and discuss feasibility, sampling and the next steps.

Frequently Asked Questions

Find answers to common questions about these applications. Use the enquiry form if you have a requirement that is not covered here.

What cable types do you build for consumer electronics?

Display, battery, internal and overmolded constructions are application-dependent.

Provide a sample, drawing and relevant appearance requirements.

Capacity, tooling and inspection are confirmed for the volume schedule.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
icon ISO 9001 - ISO 13485 - IATF 16949 - ISO 14001 certified
icon No MOQ
icon 5-7 day samples
icon 100% electrical test
icon NDA on request
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details