icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer
Drones / UAV icon DRONES / UAV IN THE FIELD

Key Application Requirements

  • Weight constraints
  • Repeated gimbal movement
  • Vibration and abrasion

How we solve it

Balance conductor selection, routing protection and strain relief against airborne mass and movement limits.

Typical Applications

Explore example applications. Final cable and harness specifications are defined by your drawing and operating conditions.

Drone gimbal cables 01
Typical Application

Drone gimbal cables

Drone gimbal cables connect moving camera or payload components while operating within a restricted space and mass allowance. Define the full movement envelope, bend locations and available support points before selecting the construction. Review torsion, abrasion and strain relief around the gimbal, then evaluate the sample through representative motion cycles with the intended connectors and surrounding mechanical parts installed.

Discuss this application
UAV payload wiring 02
Typical Application

UAV payload wiring

UAV payload wiring distributes power and signals between the platform and mission equipment within a defined weight budget. Document current requirements, interfaces, branch routes and service connections before reviewing conductor and protection choices. Support and strain relief should reflect vibration and handling during installation, with the finished mass and electrical configuration checked against the approved payload design.

Discuss this application
Aerial camera links 03
Typical Application

Aerial camera links

Aerial camera links connect the imaging hardware to processing or transmission electronics inside the aircraft. Specify the electrical interface, connector orientation and routing constraints alongside the camera installation. Review shielding, termination support and any movement near the payload, and assess image transfer in the complete platform so electrical requirements and mechanical packaging are considered together before release.

Discuss this application
Flight controller harnesses 04
Typical Application

Flight controller harnesses

Flight controller harnesses connect the controller to power, sensors, communications and other onboard equipment. Define the pinout and identify branches clearly against the platform wiring diagram. Review support points, connector retention and clearance from moving or abrasive parts, then agree continuity and inspection requirements so the finished harness can be installed and serviced in the intended airframe configuration.

Discuss this application

Discuss Your Application Requirements

Send a drawing, BOM, sample or application description. We will review the requirements and discuss feasibility, sampling and the next steps.

Frequently Asked Questions

Find answers to common questions about these applications. Use the enquiry form if you have a requirement that is not covered here.

Can you keep assemblies lightweight and high-flex for gimbal cameras?

Cable routing, flex duty and mass are reviewed together.

Supply the sample and operating movement envelope for comparison.

Sampling follows drawing approval and component availability.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
icon ISO 9001 - ISO 13485 - IATF 16949 - ISO 14001 certified
icon No MOQ
icon 5-7 day samples
icon 100% electrical test
icon NDA on request
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details