IC evaluation
Socket Adapters can be evaluated for ic evaluation. Match IC package, source and target pin patterns, pitch and board clearance to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 18-35W000-10 | SOCKET ADAPT SOIC-W TO 18DIP 0.3 |
| 24-665000-00 | SCK ADAPT 24P SOIC-W TO SOIC 0.6 |
| 08-666000-00 | SOCKET ADAPTER SOIC TO 8SOWIC |
| 1111841 | SOCKET MSOP TO SOIC |
| 1106396-32 | SOCKET ADAPTER DIP TO 32DIP 0.6 |
| 14-35W000-10 | SOCKET ADAPT SOIC-W TO 14DIP 0.3 |
| 20-350001-10 | SOCKET ADAPTER SOJ TO 20DIP 0.3 |
| 228-4817-09-0602J | RECEPTACLE DIP SOCKET 28POS .4" |
| 248-1282-19-0602J | RECEPTACLE DIP SOCKET 48POS .6" |
| 1107254-28 | SOCKET ADAPTER DIP TO 28DIP 0.3 |
| 224-1275-19-0602J | RECEPTACLE DIP SOCKET 24POS .6" |
| 28-653000-10 | SOCKET ADAPTER PLCC TO 28DIP 0.6 |
| 18-666000-00 | SOCKET ADAPTER SOIC TO 18SOWIC |
| 20-353000-10 | SOCKET ADAPTER PLCC TO 20DIP 0.3 |
| 20-301550-20 | SOCKET ADAPTER SOIC TO 20PLCC |
| 08-665000-00 | SCK ADAPT 8P SOIC-W TO SOIC 0.6 |
| PA-SOD6SM18-44 | ADAPTER 44SOIC TO 44DIP |
| 14-350000-10-HT | SOCKET ADAPTER SOIC TO 14DIP 0.3 |
| 16-354000-11-RC | SOCKET ADAPTER DIP TO 16SOIC |
| 20-350001-11-RC | SOCKET ADAPTER SOJ TO 20DIP 0.3 |
| 14-665000-00 | SCK ADAPT 14P SOIC-W TO SOIC 0.6 |
| 1107254-08 | SOCKET ADAPTER DIP TO 8DIP 0.3 |
| 12-350000-10-HT | SOCKET ADAPTER SOIC TO 12DIP 0.3 |
| PA-TS1D6SM18-40 | ADAPTER 40TSOP TO 40DIP |
The Socket Adapters range covers adapter interfaces between the specified electronic socket footprints.
Compare IC package, source and target pin patterns, pitch and board clearance for the required installation. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.
Review Convert From (Adapter End), Convert To (Adapter End), Number of Pins, Pitch - Mating and Contact Finish - Mating on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Socket Adapters can be evaluated for ic evaluation. Match IC package, source and target pin patterns, pitch and board clearance to the equipment interface.
For circuit prototyping, verify Convert From (Adapter End), Convert To (Adapter End), Number of Pins, Pitch - Mating and Contact Finish - Mating on the selected Socket Adapters. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.
In package adaptation, allow for the required mounting, routing or termination space. Check IC package, source and target pin patterns, pitch and board clearance before assembly.
For socket adapters inspection, identify the original Socket Adapters part number and mating arrangement. Compare Convert From (Adapter End), Convert To (Adapter End), Number of Pins, Pitch - Mating and Contact Finish - Mating before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: DS9075-40V/NO-BRAND
Example: 242-1281-29-0602J
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers adapter interfaces between the specified electronic socket footprints. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.
Examples in this category include 0.100" (2.54mm) and 0.070" (1.78mm). Match the selected Socket Adapters to the required IC package, source and target pin patterns, pitch and board clearance.
For Socket Adapters, check Convert From (Adapter End), Convert To (Adapter End), Number of Pins, Pitch - Mating and Contact Finish - Mating against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check IC package, source and target pin patterns, pitch and board clearance for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion. For Socket Adapters, identify the matching system and required assembly parts before ordering.
DS9075-40V/NO-BRAND specifies Convert From (Adapter End): SIP and Convert To (Adapter End): DIP. 242-1281-29-0602J specifies Convert From (Adapter End): DIP, 0.6" (15.24mm) Row Spacing and Convert To (Adapter End): DIP, 0.6" (15.24mm) Row Spacing. Check the full mating and installation requirements before treating different Socket Adapters as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include IC package, source and target pin patterns, pitch and board clearance and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details