Headphone amplifier links
Match the audio plug diameter and stereo contact arrangement to both devices.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| IO-IC109020-T2MBK | CABLE BLACK/GOLD CONN MONO 20' |
| AK244 | CABLE 3.5MM STER-2RCA FEMALE 2M |
| IO-IC109010-T2MCH-R | CABLE CHR/GOLD 90 CONN MONO 10' |
| IO-IC109015-M2MBL | CABLE SHARK BLUE CONN MONO 15' |
| 2881 | A/V AND RCA (COMPOSITE VIDEO, AU |
| 10-02133 | CBL 3.5MM R/A M-M 28AWG SHLD |
| 10-02138 | CBL 3.5MM R/A M TO 3.5MM F SHLD |
| FD72055 | MONO JACK LEAD ASSY |
| 5418 | ROUND PANEL MOUNT STEREO AUDIO E |
| 770-10041-00100 | CABLE 3.5MM MALE-FEMALE 1M |
| IO-BP176003-T3MCH-R | CABLE CHR/GOLD 90 CONN STEREO 3' |
| 10-03202 | CBL ASSEM 3.5MM 3CON M-F 3M |
| A-AV-02-45-28-091-S1 | A/V CABLE, 915MM, AWG28, 4C, WH, |
| A-AV-02-45-28-183-S3 | A/V CABLE, 1830MM, AWG28, 4C, WH |
| A-AV-02-45-28-091-S3 | A/V CABLE, 915MM, AWG28, 4C, WH, |
| IO-BP176025-T3MCH-R | CABLE CHR/GOLD 90 CONN STEREO25' |
| IO-BP176020-T3MCH-R | CABLE CHR/GOLD 90 CONN STEREO20' |
| IO-BP176050-M3MBL | CABLE SHARK BLUE CONN STEREO 50' |
| IO-BP176050-T3MCH-2R | CABLE CHR/GOLD 90 CONN STEREO50' |
| S-H273 | REVERB CABLES 3 FOOT (91 CM) |
| 35HR07235X | 3.5MM TO 3.5MM STERE |
| IO-IC109020-M2MBL | CABLE SHARK BLUE CONN MONO 20' |
| 73-7411-3 | CABLE MODULAR ASSEMBLY |
| A060-012 | CABLE DIGITAL COAX M/M 12' |
Audio Cable Assemblies includes mono, stereo and four-conductor audio leads, extension cables and patch cords.
When selecting an assembly, check connector diameter, plug or jack arrangement, contact wiring and shielding.
An audio plug can carry different wiring arrangements. A TRS connector does not by itself distinguish balanced mono from unbalanced stereo; consult both devices.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Match the audio plug diameter and stereo contact arrangement to both devices.
Check whether the patch panel requires balanced or unbalanced wiring and the specified plug format.
Confirm the source output and speaker input use compatible analogue audio contacts.
Use the specified channel wiring and shielding; connector fit alone does not establish signal compatibility.
Compare the interfaces, construction and selection details of these two product options.
Representative listed part: CA-2206.
Representative listed part: 770-10040-00100.
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
Compare the Channels attribute with the wiring required by both devices. This family contains different conductor arrangements; a matching plug diameter alone does not establish the required audio or microphone connection.
Check the 1st Connector and 2nd Connector entries independently, including plug or jack, diameter and angle. Choose the arrangement that matches the two equipment ports rather than selecting from the cable name alone.
Review length, shielding, connector angle and intended usage for the exact part. Provide the available clearance around the equipment ports if a straight plug may obstruct installation.
An audio plug can carry different wiring arrangements. A TRS connector does not by itself distinguish balanced mono from unbalanced stereo; consult both devices.
CA-2206 is shown as mono audio cables, with Channels listed as Mono. 770-10040-00100 is shown as trs audio cables, with Channels listed as Stereo (3 Conductor, TRS). These are two examples, not a statement that every part has either specification.
Provide the original manufacturer and complete part number, or a drawing. For this range, compare connector diameter, plug or jack arrangement, contact wiring and shielding. Identify any requirement not covered by the listing rather than selecting only by length or appearance.
Supply a mating-interface drawing and the required connector diameter, plug or jack arrangement, contact wiring and shielding. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details