Equipment interfaces
Barrel Connector Accessories can be evaluated for equipment interfaces. Match mating diameter, plug or jack arrangement, contact assignment and mounting to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| OR-10 | AUDIO JACK O-RING |
| K176 | SLEEVE TRMNL FOR 3501FPX 1=100PC |
| HDW-120 | NUT FOR ASJ-203C-M-WP |
| OR-70 | AUDIO JACK O-RING |
| 56-00001 | WASHER LOCK NICKEL |
| P2993 | COVER FOR SN37A14B PHONE JACK |
| LP-50 | RCA COAX LOOPING PLUG 50 OHM |
| 56-00000 | HDWR HEX NUT M11X1.0 NICKEL |
| 56-00004 | HEX NUT 11MM BRASS M9X0.75MM |
| P2441 | WASHER FLAT NICKEL-PLATED STEEL |
| PJ-005X-HDW | REPLACE NUT&WASHER FOR PJ-005A/B |
| 515X | COVER JACK BLACK W/HARDWARE |
| P2442 | WASHER PHENOLIC FLAT |
| PCAP25 | 1/4" WEATHER TIGHT CAP |
| JCAP | POWER JACK SEAL CAP |
| OR-80 | AUDIO JACK O-RING |
| T10581 | HANDLE FOR 1/4" COMM PHONE PLUG |
| 2.5MM-NUT-E | REPLACEMENT 2.5MM NUT |
| 612 | CONN COVER JACK BRIGHT NICKEL |
| 3.5MM-NUT-E | REPLACEMENT 3.5MM NUT |
| ADP-06 | ADPT CBL STRN RELIEF |
| RCA CAP - SHORTING | RCA SHIELDED SHORTING CAP PLUG |
| 56-00003 | OUTER SLEEVE FOR PWR PLUG ASSEM |
| 56-00002 | INNER SLEEVE FOR PWR PLUG ASSEM |
The Barrel Connector Accessories range covers cylindrical audio or power interfaces selected by their specified connector type.
Compare mating diameter, plug or jack arrangement, contact assignment and mounting for the required installation. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.
Review Accessory Type, For Use With/Related Products, Color, Manufacturer and Packaging on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Barrel Connector Accessories can be evaluated for equipment interfaces. Match mating diameter, plug or jack arrangement, contact assignment and mounting to the equipment interface.
For panel assembly, verify Accessory Type, For Use With/Related Products, Color, Manufacturer and Packaging on the selected Barrel Connector Accessories. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.
In bench verification, allow for the required mounting, routing or termination space. Check mating diameter, plug or jack arrangement, contact assignment and mounting before assembly.
For barrel connector accessories inspection, identify the original Barrel Connector Accessories part number and mating arrangement. Compare Accessory Type, For Use With/Related Products, Color, Manufacturer and Packaging before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 50260002-521
Example: 50260003-521
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers cylindrical audio or power interfaces selected by their specified connector type. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.
Examples in this category include Cable Clamp, Cap (Cover) and Sleeve. Match the selected Barrel Connector Accessories to the required mating diameter, plug or jack arrangement, contact assignment and mounting.
For Barrel Connector Accessories, check Accessory Type, For Use With/Related Products, Color, Manufacturer and Packaging against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check mating diameter, plug or jack arrangement, contact assignment and mounting for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory. For Barrel Connector Accessories, identify the matching system and required assembly parts before ordering.
50260002-521 specifies Accessory Type: Cable Clamp and For Use With/Related Products: T Series. 50260003-521 specifies Accessory Type: Cable Clamp and For Use With/Related Products: T Series. Check the full mating and installation requirements before treating different Barrel Connector Accessories as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include mating diameter, plug or jack arrangement, contact assignment and mounting and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details