DC adapter connections
Match the inner and outer barrel dimensions, polarity and complete cable current rating.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 10-02751 | SPLITTER 3.5X1.35MM F TO X4 M |
| 10-02534 | CBL ASSY RA M-F 4X1.7MM 6' |
| 10-02767 | SPLITTER 5.5X2.5MM M TO X2 M |
| 10-02538 | CBL ASSY RA M-F 2.35X0.7MM 6' |
| 10-02536 | CBL ASSY RA M-F 3.5X1.1MM 6' |
| 10-03936 | CBL R/A 2.1MM PLUG TO JACK 3' |
| LRA1806F00-JP | CBL ASSY 2.5MM PLUG-CBL FLAT 6' |
| 10-02524 | CBL ASSY M-F 3.5X1.35MM 6' 24AWG |
| 10-02563 | CBL RA M 2.5MM-RA M 2.1MM 6' |
| 10-02558 | CBL M 5.5X2.1MM-RA M 5.5X2.1MM |
| 10-03920 | CBL ASSY 2.1MM PLUG TO PLUG 3' |
| 10-02521 | CBL ASSY M-F 5.5X2.1MM 6' 24AWG |
| 57-PRP1 | CBL ASSY 2.1MM JCK-PLG RND 0.42' |
| 10-03916 | CBL R/A 2.1MM PLUG TO LEADS 3' |
| 10-02749 | SPLITTER 3.5X1.35MM F TO X2 M |
| 10-05158 | CBL 5.5X2.1MM JACK TO WIRE 1' |
DC Barrel Power Cables includes DC barrel-plug leads, extensions and cable terminations.
When selecting an assembly, check inner and outer plug diameter, polarity, wire size and required current.
Matching the outside barrel diameter does not establish the centre-pin size or polarity. These are separate checks against the adapter and device.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Match the inner and outer barrel dimensions, polarity and complete cable current rating.
Check the required voltage and polarity before connecting a replacement lead.
Confirm the controller inlet dimensions and load current; do not infer ratings from connector appearance.
Check the camera supply specification and cable routing before selecting a power lead.
Compare the interfaces, construction and selection details of these two product options.
Representative listed part: 10-01239.
Representative listed part: 10-03916.
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
Check both the inner and outer diameters in Connector Type. The source data includes 2.1 mm and 2.5 mm inner-diameter variants with a 5.5 mm outer diameter, so the outer diameter alone is insufficient for selection.
Use the equipment or adapter specification to confirm polarity and electrical requirements. Do not infer them from connector dimensions or wire colours; request confirmation if the product attributes do not state them.
Compare the Style entry and the clearance around the equipment inlet. Also check whether the far end is another connector or wire leads, since these need different installation arrangements.
Matching the outside barrel diameter does not establish the centre-pin size or polarity. These are separate checks against the adapter and device.
10-01239 is shown as straight barrel-plug leads, with Style listed as Plug to Wire Leads. 10-03916 is shown as right-angle barrel-plug leads, with Style listed as Plug, Right Angle to Wire Leads. These are two examples, not a statement that every part has either specification.
Provide the original manufacturer and complete part number, or a drawing. For this range, compare inner and outer plug diameter, polarity, wire size and required current. Identify any requirement not covered by the listing rather than selecting only by length or appearance.
Supply a mating-interface drawing and the required inner and outer plug diameter, polarity, wire size and required current. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details