icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
157230-0R5

CBL ASSY MINI DP-VGA ADT 1.64'

C1410070M6MLX5(R)

CBL ASSY 3P SKT-IEC 320 0.2"

PAC-025

CBL ASSY SAE TO POWERLET SKT CBL

PAC-072-18

CBL ASSY POWERLET M TO SAE CBL

PKT-064

CBL ASSY COAX TO BATTERY LEADS

PAC-007

CBL ASSY POWERLET PLUG Y SOCKETS

688014645

CBL ASSY FLEXIMATE TO FERR 350MM

887685200

CBL ASSY M-F 2 DMS59 TO VGA 0.2

887418611

CBL ASSY DFP DIGITAL CABLE

887418601

CBL ASSY DFP DIGITAL CABLE

TCD2473A201-007

CBL ASY CIRC 4P M TO RJ45 32.81'

TCD1473A201-001

CBL ASSY CIRC 4P M TO RJ45 1.64'

TCD14745101-006

CBL ASY CIRC 4P M TO RJ45 22.97'

TCD14745101-020

CBL ASSY CIRC 4P M TO RJ45 6.56'

TCD14745101-002

CBL ASSY CIRC 4P M TO RJ45 3.28'

TCD14741111-005

CBL ASSY CIRC 4P M TO RJ45 16.4"

TCD2473A201-002

CBL ASSY CIRC 4P M TO RJ45 3.28'

TCD14741111-003

CBL ASSY CIRC 4P M TO RJ45 4.92'

TCD2473A201-001

CBL ASSY CIRC 4P M TO RJ45 1.64'

TCD14741111-002

CBL ASSY CIRC 4P M TO RJ45 3.28'

TCD14745101-005

CBL ASSY CIRC 4P M TO RJ45 16.4"

TCD14741111-006

CBL ASY CIRC 4P M TO RJ45 22.97'

TCD14745101-007

CBL ASY CIRC 4P M TO RJ45 32.81'

TCD14745101-001

CBL ASSY CIRC 4P M TO RJ45 1.64'

About Between Series Adapter Cables

Between-Series Adapter Cables includes cable assemblies with different connector series at their two ends.

When selecting an assembly, check both interface standards, pin mapping, shielding and any required conversion.

A change of connector format does not prove protocol, signal-level or power conversion. Confirm whether the selected assembly is passive or contains conversion electronics.

Between Series Adapter Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Peripheral interface adaptation

Peripheral interface adaptation

Check both interface standards and the full pin mapping; a passive adapter does not convert protocols.

Instrument breakout links

Instrument breakout links

Confirm each breakout connection against the instrument pin assignment and shielding requirements.

Legacy equipment integration

Legacy equipment integration

Verify electrical levels and connector functions before integrating the equipment.

Prototype interface evaluation

Prototype interface evaluation

Compare the source and destination signals before deciding whether conversion electronics are required.

Shielded adapter cables vs. Unshielded adapter cables

Compare the interfaces, construction and selection details of these two product options.

Shielded adapter cables

Representative listed part: 1300480291.

  • Connector Type Circular 04 pos Male to RJ45, 8p4c
  • Cable Type Round
  • Shielding Shielded
  • Length 49.21' (15.00m)
  • Usage Not specified for this example

Unshielded adapter cables

Representative listed part: 1300480369.

  • Connector Type Circular 04 pos Male to RJ45, 8p4c
  • Cable Type Round
  • Shielding Unshielded
  • Length 150.92' (46.00m)
  • Usage Not specified for this example

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

Does a between-series cable guarantee that two devices can communicate?

Confirm the source and destination interfaces, signal assignment and equipment requirements. A cable listing that connects two connector series is not, by itself, evidence of electronic conversion or protocol compatibility.

Read the complete Connector Type entry, including position and contact counts. Obtain or compare the wiring diagram so each required signal reaches the intended contact at the other end.

Review the listed Shielding and Cable Type together with both connector terminations. If grounding continuity or shield termination is important, include that requirement in the enquiry and request confirmation for the exact part.

A change of connector format does not prove protocol, signal-level or power conversion. Confirm whether the selected assembly is passive or contains conversion electronics.

1300480291 is shown as shielded adapter cables, with Shielding listed as Shielded. 1300480369 is shown as unshielded adapter cables, with Shielding listed as Unshielded. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare both interface standards, pin mapping, shielding and any required conversion. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required both interface standards, pin mapping, shielding and any required conversion. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details