icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
900004278

0985 YM57530-W 103/6.5M

1201088059

M12-4P(D)-MM-ST/RJ45-M-3M-PUR

1201088379

REC M12 ETH 4P DC FE WSOR BM 4M

1201088064

M12-4P(D)-FE-ST/RJ45-M-3M-PUR

184428-01

ISOLATED SERIAL CONVERTER CABLE,

6XV18502LH20

CABLE TP CORD 15/RJ45 2 M

1200980215

MIC 5P M/MP TO VERT DSUB 0.2M SH

BCC0E2E

CONNECTION 1=M12X1-MALE, STRAIGH

TCSCCN4F3M05T

CANOPEN PREASSEMBLED CABLE - FOR

2106

0985 S4742 104/30 M

EXP-HDMI-USBC

18GBPS USB-C TO HDMI ADAPTER

1-2823590-7

CBL ASSY CIRC 8P M TO RECT 0.26'

685620003

SAS 4X-4SATA 0.762M TARGET BASE

1-2823590-4

CBL ASSY CIRC 5P F TO RECT 0.26'

1-2823589-1

CBL ASSY CIRC 4P M TO RECT 0.26'

X40017

USB-C TO HDMI 4K 60HZ CABLE 2 ME

ZDC2LK3-GY

ZENDURE 100CM SUPERCORD KEVLAR U

1-2823590-3

CBL ASSY CIRC 5P M TO RECT 0.26'

1-2823590-1

CBL ASSY CIRC 5P M-RECT 0.26'

DP-VGA-15

15' DisplayPort to VGA w/ Latch

887663500

P&D-A-M TO VGA(F) (DUAL) 6 DELL:

ZDC2LK3-RD

ZENDURE 100CM SUPERCORD KEVLAR U

887640700

MINI-B TO DB-9(M) CABLE ASSEMBLY

849013013

90 DEG RJ-45 TO D-SUB 5M

About Between Series Adapter Cables

Between-Series Adapter Cables includes cable assemblies with different connector series at their two ends.

When selecting an assembly, check both interface standards, pin mapping, shielding and any required conversion.

A change of connector format does not prove protocol, signal-level or power conversion. Confirm whether the selected assembly is passive or contains conversion electronics.

Between Series Adapter Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Peripheral interface adaptation

Peripheral interface adaptation

Check both interface standards and the full pin mapping; a passive adapter does not convert protocols.

Instrument breakout links

Instrument breakout links

Confirm each breakout connection against the instrument pin assignment and shielding requirements.

Legacy equipment integration

Legacy equipment integration

Verify electrical levels and connector functions before integrating the equipment.

Prototype interface evaluation

Prototype interface evaluation

Compare the source and destination signals before deciding whether conversion electronics are required.

Shielded adapter cables vs. Unshielded adapter cables

Compare the interfaces, construction and selection details of these two product options.

Shielded adapter cables

Representative listed part: 1300480291.

  • Connector Type Circular 04 pos Male to RJ45, 8p4c
  • Cable Type Round
  • Shielding Shielded
  • Length 49.21' (15.00m)
  • Usage Not specified for this example

Unshielded adapter cables

Representative listed part: 1300480369.

  • Connector Type Circular 04 pos Male to RJ45, 8p4c
  • Cable Type Round
  • Shielding Unshielded
  • Length 150.92' (46.00m)
  • Usage Not specified for this example

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

Does a between-series cable guarantee that two devices can communicate?

Confirm the source and destination interfaces, signal assignment and equipment requirements. A cable listing that connects two connector series is not, by itself, evidence of electronic conversion or protocol compatibility.

Read the complete Connector Type entry, including position and contact counts. Obtain or compare the wiring diagram so each required signal reaches the intended contact at the other end.

Review the listed Shielding and Cable Type together with both connector terminations. If grounding continuity or shield termination is important, include that requirement in the enquiry and request confirmation for the exact part.

A change of connector format does not prove protocol, signal-level or power conversion. Confirm whether the selected assembly is passive or contains conversion electronics.

1300480291 is shown as shielded adapter cables, with Shielding listed as Shielded. 1300480369 is shown as unshielded adapter cables, with Shielding listed as Unshielded. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare both interface standards, pin mapping, shielding and any required conversion. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required both interface standards, pin mapping, shielding and any required conversion. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details