Interface integration
Between Series Adapters can be evaluated for interface integration. Match both mating formats, contact mapping and electrical function to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| NMA-6209 | MODULAR ADAPTER 6P6C RJ12 TO DB |
| MHDA9-PMJ8-Y-K | 9 WAY MALE D-SUB TO RJ45 ADAPTOR |
| TCAW-74-W | 7P RV TO 4-POLE FLAT W/BOOT |
| RJADK09S7080821 | ADAPT DB9F TO RJ45 JACK |
| MHDA25-SMJ8-M-K | 25 WAY FEMALE D-SUB TO RJ45 ADAP |
| RJADK15P7080821 | ADAPT DB15M TO RJ45 JACK |
| RJADK15P7080811 | ADAPT DB15M TO RJ45 JACK BLACK |
| BU-30211-5 | ADAPT SPADE LUG TO BAN JACK GRN |
| RJADK25P7080821 | ADAPT DB25M TO RJ45 JACK |
| 3560-0# | TEST ADAPTER .040 SOCKET (BLACK) |
| RJADK15S7080811 | ADAPT DB15F TO RJ45 JACK BLACK |
| RJADK09P7080821 | ADAPT DB9M TO RJ45 JACK |
| 3560-2# | TEST ADAPT.040 SOCKET (RED) |
| TCAW-75 | 7P RV TO 5-POLE FLAT |
| TCA-64 | 6-POLE ROUND TO 4-POLE FLAT |
| TCAW-74 | 7P RV TO 4-POLE FLAT |
| LS-00014 | DC BARREL JACK ADAPTER MALE 2PK |
| TCA-74 | 7P ROUND TO 4-POLE FLAT |
| 3296 | ADAPT BNC PLUG TO DBL BIND POST |
| 322X | ADAPT FMALE XLR TO RCA JACK |
| MHDA9-SMJ8-R-K | 9 WAY FEMALE D-SUB TO RJ45 ADAPT |
| MHDA9-PMJ8-M-K | 9 WAY MALE D-SUB MODULAR ADAPTOR |
| MHDA9-PMJ6-K | 9 WAY MALE D-SUB TO RJ11 ADAPTOR |
| MHDA9-SMJ6-K | 9 WAY FEMALE D-SUB TO RJ11 ADAPT |
The Between Series Adapters range covers couplers between specified connector interfaces.
Compare both mating formats, contact mapping and electrical function for the required installation. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.
Review Convert From (Adapter End), Convert To (Adapter End), Color and Features on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Between Series Adapters can be evaluated for interface integration. Match both mating formats, contact mapping and electrical function to the equipment interface.
For prototype connections, verify Convert From (Adapter End), Convert To (Adapter End), Color and Features on the selected Between Series Adapters. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.
In test fixtures, allow for the required mounting, routing or termination space. Check both mating formats, contact mapping and electrical function before assembly.
For between series adapters inspection, identify the original Between Series Adapters part number and mating arrangement. Compare Convert From (Adapter End), Convert To (Adapter End), Color and Features before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 747410005
Example: 887419100
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers couplers between specified connector interfaces. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.
Examples in this category include SFP Plug, D-Sub, 15 Pin Male and D-Sub, 9 Pin Female. Match the selected Between Series Adapters to the required both mating formats, contact mapping and electrical function.
For Between Series Adapters, check Convert From (Adapter End), Convert To (Adapter End), Color and Features against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check both mating formats, contact mapping and electrical function for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion. For Between Series Adapters, identify the matching system and required assembly parts before ordering.
747410005 specifies Convert From (Adapter End): SFP Plug and Convert To (Adapter End): Modular, Female Jack, 8p8c (RJ45). 887419100 specifies Convert From (Adapter End): D-Sub, 15 Pin Male and Convert To (Adapter End): DVI-I Dual Link, Female. Check the full mating and installation requirements before treating different Between Series Adapters as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include both mating formats, contact mapping and electrical function and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details