Equipment connections
Circular Connector Contacts can be evaluated for equipment connections. Match mating series, keying, contact layout, coupling and sealing to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 65-80041 | 2MM SOCKET CONTACT. WIRE RANGE 1 |
| 1627292 | CONTACT PIN 1.5MM CRIMP |
| 330-8674-026 | CONTACT PIN CRIMP GOLD |
| 1603501 | RC-59S2000 |
| 10-729867-082 | CONTACT PIN 8AWG CRIMP NICKEL |
| 1414275 | CONTACT PIN 18-22AWG CRIMP GOLD |
| 10-597261-721 | CONTACT SOCKET 22-28AWG CRIMP |
| MP24M23G15 | PIN CONTACT, MACHINED, SIZE 16, |
| APK-SB25G10-002 (SINGLE) | TRANSPORTATION |
| MP-108500 | MP SERIES SKT CRIMP SIZE 18 |
| MP20W23G15 | PIN CONTACT, MACHINED, SIZE 20, |
| APK-SB25G25-002 (SINGLE) | TRANSPORTATION |
| MP-108400 | MP PIN COMBO CRIMP/SOLDER #16 |
| CN0900-252 | 26500 CON #16 PIN |
| MP20M23GE1F | MACHINED, PIN, GOLD, GROUND, 20A |
| 430-8560-006 | CONTACT PIN 20-24AWG CRIMP GOLD |
| EN3CC20M | CONN TERMINAL MALE #20 |
| VS702012 | ST385 16S |
| VS701529 | ST485 8-50S |
| VS702011 | ST385 16SS |
| VS702002 | ST385 16P |
| VS701503 | ST485 18S |
| VS701849 | ST485 4-78P CD5 |
| VS700176 | CO1602-8-18P #20 |
The Circular Connector Contacts range covers keyed circular interfaces with defined contact arrangements.
Compare mating series, keying, contact layout, coupling and sealing for the required installation. These are separate conductive contacts. Match the contact to its housing, wire range and specified termination tooling.
Review Type, Contact Type, Contact Size, Wire Gauge or Range - AWG and Contact Termination on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Circular Connector Contacts can be evaluated for equipment connections. Match mating series, keying, contact layout, coupling and sealing to the equipment interface.
For panel interfaces, verify Type, Contact Type, Contact Size, Wire Gauge or Range - AWG and Contact Termination on the selected Circular Connector Contacts. These are separate conductive contacts. Match the contact to its housing, wire range and specified termination tooling.
In harness integration, allow for the required mounting, routing or termination space. Check mating series, keying, contact layout, coupling and sealing before assembly.
For circular connector contacts inspection, identify the original Circular Connector Contacts part number and mating arrangement. Compare Type, Contact Type, Contact Size, Wire Gauge or Range - AWG and Contact Termination before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 845900024
Example: SA3347
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers keyed circular interfaces with defined contact arrangements. These are separate conductive contacts. Match the contact to its housing, wire range and specified termination tooling.
Examples in this category include Socket and Pin. Match the selected Circular Connector Contacts to the required mating series, keying, contact layout, coupling and sealing.
For Circular Connector Contacts, check Type, Contact Type, Contact Size, Wire Gauge or Range - AWG and Contact Termination against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check mating series, keying, contact layout, coupling and sealing for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
These are separate conductive contacts. Match the contact to its housing, wire range and specified termination tooling. For Circular Connector Contacts, identify the matching system and required assembly parts before ordering.
845900024 specifies Type: Power, Stamped and Contact Type: Socket. SA3347 specifies Type: Power and Contact Type: Socket. Check the full mating and installation requirements before treating different Circular Connector Contacts as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include mating series, keying, contact layout, coupling and sealing and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details