Legacy printer connections
Confirm the peripheral interface, contact count and wiring map.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 14B26-WZPB-450-0RC | MDR CAMERA CABLE 26POS M-M 4.5M |
| 14B26-SZ3B-050-04C | MDR CAMERA CABLE 26POS M-M |
| DX30A-20P-10009 | CONNECTOR |
| 80-0012-6517-4 | ASSY OM-90201G-100-N4-28.0-Y |
| 80-0012-6055-5 | ASSY OM-90101G-100-N4-8.0 |
| 70-0100-2234-4 | ASSY OM-90101G-080-N4-072.0 Y RC |
| 70-0100-2110-6 | ASSY OM-CES-90111G-068-N4-24.0-Y |
| 70-0100-1532-2 | ASSY OM-90201G-080-N4-012.0-Y RC |
| TX20A-26P-18INCH-CABLE | CONN RCPT 1.27MM 26POS R/A |
| TX20A-26P-12INCH-CABLE | CONN RCPT 1.27MM 26POS R/A |
| R M1 M1-R6R6-014-362-1.91-44-P1 | 14POS MDR ASSY 2M W/THUMBSCREWS |
| 4926-0108 | ASSY MDR36448METERS |
| 799180082 | VHDCI - VHDCI 5 MTS. |
| 6.01303E+13 | HAR-MIK BELL 26M-IDC 0.75-0.90 B |
| 70-0100-1198-2 | ASSY OM-90201G-100-N4-035.0-Y RC |
| 14B26-SZ3B-F00-04C | MDR CAMERA CABLE 26POS M-M |
| 14B26-WZPB-100-0RC | MDR CAMERA CABLE 26POS M-M 1M |
| 14B26-SZ3B-700-04C | MDR CAMERA CABLE 26POS M-M |
| 14H26-WZPM-700-0RC | MDR CAMERA CABLE 26POS M-RA/M 7M |
| 14H26-SZ3M-700-04C | MDR CAMERA CABLE 26POS M-RA/M |
| 14B26-WZPB-350-0RC | MDR CAMERA CABLE 26POS M-M 3.5M |
| 14B26-SZ3B-600-04C | MDR CAMERA CABLE 26POS M-M |
| DX33A-50S-LNA-20005 | CONNECTOR |
| DX30M-20P-20009(50) | CONNECTOR |
Centronics Cable Assemblies includes D-shaped Centronics interconnects for compatible peripheral interfaces.
When selecting an assembly, check contact count, connector gender, wiring map, retention and cable construction.
A common connector shell or contact count does not establish a compatible peripheral interface or SCSI wiring arrangement. Compare the equipment pin assignment.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Confirm the peripheral interface, contact count and wiring map.
Match the equipment pin assignment and retention hardware before replacing its cable.
Check the documented interface standard; shell shape alone does not establish SCSI compatibility.
Verify the required pin-to-pin map and shield connection for the selected equipment.
Compare the interfaces, construction and selection details of these two product options.
Representative listed part: AK434-3.
Representative listed part: 70-0100-2237-7.
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
Check the full Configuration attribute for position count and mating gender at each end. Provide the equipment references or connector drawings if the connector family is described differently in your existing documentation.
Compare the end configuration, wiring, shielding and available routing space. The cable cross-section is only one selection attribute; confirm the complete connection and installation before substituting a different construction.
Use the Style attribute and the equipment documentation together. Do not infer a supported interface or operating mode solely from the external connector shape or a position count.
A common connector shell or contact count does not establish a compatible peripheral interface or SCSI wiring arrangement. Compare the equipment pin assignment.
AK434-3 is shown as round centronics cables, with Cable Type listed as Round, Beige. 70-0100-2237-7 is shown as ribbon centronics cables, with Cable Type listed as Ribbon, Gray. These are two examples, not a statement that every part has either specification.
Provide the original manufacturer and complete part number, or a drawing. For this range, compare contact count, connector gender, wiring map, retention and cable construction. Identify any requirement not covered by the listing rather than selecting only by length or appearance.
Supply a mating-interface drawing and the required contact count, connector gender, wiring map, retention and cable construction. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details