icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
710-10042-00200

CABLE ASSY DB09 SHLD BEIGE 2M

720-10010-00025

CABLE ASSY DB09 TO DB25 250MM

49745A 060S2

CABLE ASSY DB15 SHLD CHROM 1.52M

CIM-100-01-CA006

CABLE ASSY DB09 SHLD CLEAR 1.83M

CIM-100-04-CA012

CABLE ASSY DB09 SHLD CLEAR 3.66M

CIM-100-01-CA003

CABLE ASSY DB09 SHLD CLR 914.4MM

710-10032-01000

CABLE ASSY DB25 SHLD BEIGE 10M

720-10023-00300

CABLE ASSY DB09 TO DB25 BEIGE 3M

731-10070-00500

CABLE ASSY HD15 BEIGE 5M

731-10071-01000

CABLE ASSY HD15 SHLD BEIGE 10M

732-10080-00500

CABLE ASSY HD15 BEIGE 5M

700-10118-00300

CABLE ASSY DB25 SHLD BEIGE 3M

731-10064-00300

CABLE ASSY HD15 SHLD BEIGE 3M

730-10072-01000

CABLE ASSY HD15 SHLD BEIGE 10M

730-10079-00500

CABLE ASSY HD15 SHLD BEIGE 5M

49907A 060S2

CABLE ASSY DB09 SHLD 7.62M

730-10075-00300

CABLE ASSY HD15 SHLD BEIGE 3M

730-10069-00500

CABLE ASSY HD15 SHLD BEIGE 5M

732-10086-01500

CABLE ASSY HD15 BEIGE 15M

49766A 060S2

CABLE ASSY DB50 SHLD CHROM 3.05M

CIM-100-04-CA003

CABLE ASSY DB09 SHLD CLR 914.4MM

CI-2000-1-025

CABLE ASSY 7.62M

CIM-100-08-CA012

CABLE ASSY DB09 SHLD CLEAR 3.66M

49615A 060S2

CABLE ASSY DB25 SHLD CHROM 1.52M

About D-Sub Cables

D-Sub Cable Assemblies includes D-sub interconnects with different contact counts and end configurations.

When selecting an assembly, check contact count, gender, pinout, mounting hardware and cable shielding.

Straight-through, crossover and equipment-specific D-sub cables may use similar shells. Confirm the pin-to-pin map instead of inferring it from the connector size.

D-Sub Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Serial controller links

Serial controller links

Confirm the serial standard and pinout; a D-sub shell does not identify the electrical interface.

Instrument rear-panel wiring

Instrument rear-panel wiring

Check contact count, gender and screw-lock hardware against the instrument drawing.

Legacy workstation servicing

Legacy workstation servicing

Distinguish straight-through, crossover and equipment-specific wiring before replacement.

Panel extension routing

Panel extension routing

Match both ends and allow clearance for the backshell, mounting screws and cable bend.

Male D-sub termination vs. Female D-sub termination

Compare the interfaces, construction and selection details of these two product options.

Male D-sub termination

Representative listed part: 1200980207.

  • 1st Connector Plug, Male Pins
  • 2nd Connector Plug, Male Pins (2), Right Angle
  • Type DB9
  • Number of Positions 9
  • Shielding Shielded
  • Length 3.28' (1.00m)

Female D-sub termination

Representative listed part: M7OOK-0906J.

  • 1st Connector Receptacle, Female Sockets
  • 2nd Connector Receptacle, Female Sockets
  • Type DB9
  • Number of Positions 9
  • Shielding Unshielded
  • Length 6.00' (1.83m)

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

Are D-sub cables with the same pin count wired identically?

Check both mating ends and obtain the pin-to-pin wiring required by the equipment. Position count identifies only part of the connection; it does not document straight-through wiring, crossovers or unused contacts.

Read the contact description at both ends and compare it with the equipment connector. Specify the shell size, position count and retention arrangement as well as male pins or female sockets.

Confirm the lead identification, length and termination requirements for the installation. A connector-to-leads assembly requires a defined wiring plan rather than the same mating arrangement as a fully terminated cable.

Straight-through, crossover and equipment-specific D-sub cables may use similar shells. Confirm the pin-to-pin map instead of inferring it from the connector size.

1200980207 is shown as male d-sub termination, with 1st Connector listed as Plug, Male Pins. M7OOK-0906J is shown as female d-sub termination, with 1st Connector listed as Receptacle, Female Sockets. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare contact count, gender, pinout, mounting hardware and cable shielding. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required contact count, gender, pinout, mounting hardware and cable shielding. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details