icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
FC2ZO-24-10B2

OM4 24-FIBER TOTAL, AQUA ADAPTER

FH4ZU-24-NMNMB

OM4 24-FIBERHD FLEXDARK FIBER CO

FHC3ZA-24H-10A

OM4 HD FLEX 4-TO-1 CONVERSION CA

FHC3ZO-24F-10A

OM4 HD FLEX 4-TO-1 CONVERSION CA

FC2SA-24-10AF

OM4+ SIG CORE, 24-FIBER, ULTRA L

NKFD1W24BLDLCZ

NK FIBER OPTIC DRAWER

HSC-HA3-D1

CONNECTOR

FAP6WSTBGZ/N

ADAPTER MODULE

FAP12WNKDYLLCZ

12 POSITION KEYED/STD (D-YELLOW)

AX100082+TW

ADAP. STRIP 12 FC BLACK,

AX100538+TW

ADAP. STRIP 6 SC SIMPLEX

HRFC-PA3-G1(51)

ADAPTER

FQ6N-08-10AF

8-FIBER QN SFQ CASSETTE, OM1 (62

AX100084+TW

ADAP. STRIP 12 SC SIMPLE

FQXO-08-10AS

8-FIBER QN SFQ CASSETTE, OPTIMIZ

FQZN-06-03AS

6-FIBER, SFQ CASSETTE, OM4 50/12

FQZ-12-10

12-FIBER SFQ FIBER CASSETTE OM4

FQSA-12-10B2

12-FIBER OM4+ QN SFQ CASSETTE UL

FQXO-06-3AF

6-FIBER QN SFQ CASSETTE, OPTIMIZ

FCE2UBLDS

CAT6 LEFT/RIGHT 45 DEGREE TG WIR

FHCXO-24F-10B2

HARDWARE/ACCESSORY

FQ9-6-3

ACCESSORY WIRE MANAGEMENT

FHC3ZO-24H-10NF

FIBER OPTIC ADAPTER PANEL

FAP12WVLDLCZ/N

FIBER OPTIC ADAPTER PANEL

About Fiber Optic Connector Adapters

The Fiber Optic Connector Adapters range covers connector interfaces for fibre-optic signal paths.

Compare connector format, fibre type, polish and alignment for the required installation. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Review Type, Convert From (Adapter End), Simplex/Duplex, Mounting Type and Color on the individual product page before choosing a part.

Fiber Optic Connector Adapters

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Optical network equipment

Optical network equipment

Fiber Optic Connector Adapters can be evaluated for optical network equipment. Match connector format, fibre type, polish and alignment to the equipment interface.

Patch-panel interfaces

Patch-panel interfaces

For patch-panel interfaces, verify Type, Convert From (Adapter End), Simplex/Duplex, Mounting Type and Color on the selected Fiber Optic Connector Adapters. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Optical verification

Optical verification

In optical verification, allow for the required mounting, routing or termination space. Check connector format, fibre type, polish and alignment before assembly.

Fiber Optic Connector Adapters inspection

Fiber Optic Connector Adapters inspection

For fiber optic connector adapters inspection, identify the original Fiber Optic Connector Adapters part number and mating arrangement. Compare Type, Convert From (Adapter End), Simplex/Duplex, Mounting Type and Color before substitution.

T1026 configuration vs. 1061660000 configuration

Compare the interfaces, construction and selection details of these two product options.

T1026 configuration

Example: T1026

  • Type Adapter
  • Convert From (Adapter End) SOC Receptacle
  • Simplex/Duplex Simplex
  • Mounting Type Free Hanging (In-Line)
  • Color Silver

1061660000 configuration

Example: 1061660000

  • Type Coupler
  • Convert From (Adapter End) SC Receptacle
  • Convert To (Adapter End) SC Receptacle
  • Simplex/Duplex Duplex
  • Mode Singlemode
  • Mounting Type Panel Mount, Flange (2 Hole)
  • Housing Material Polymer

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Fiber Optic Connector Adapters include?

This category covers connector interfaces for fibre-optic signal paths. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Examples in this category include Adapter and Coupler. Match the selected Fiber Optic Connector Adapters to the required connector format, fibre type, polish and alignment.

For Fiber Optic Connector Adapters, check Type, Convert From (Adapter End), Simplex/Duplex, Mounting Type and Color against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check connector format, fibre type, polish and alignment for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion. For Fiber Optic Connector Adapters, identify the matching system and required assembly parts before ordering.

T1026 specifies Type: Adapter and Convert From (Adapter End): SOC Receptacle. 1061660000 specifies Type: Coupler and Convert From (Adapter End): SC Receptacle. Check the full mating and installation requirements before treating different Fiber Optic Connector Adapters as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include connector format, fibre type, polish and alignment and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details