icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
F727752710

LC CUT OUT WITH PANEL CLIP ADAPT

F727754700

LC RJ-45 CUT OUT WITH PANEL CLIP

F727752800

LC CUT OUT WITH PANEL CLIP ADAPT

F709722000

ST ADAPTOR WITH BRONZE ALIGNMENT

F727710000

LC SNAP-IN MOUNTING ADAPTOR WITH

5034800800-TR750

0.5 FPC E/O B/F ASSY 8CKT EMBSTP

5025851471

1.50MM PITCH, CLIK-MATE PCB RECE

F727752100

LC CUT OUT WITH PANEL CLIP ADAPT

F727751002

LC ADPT DLX SM PC Z LP BL /100

F727750200

LC ADPT D SM PC MTL RJ-45 /100

F727740800

LC ADPT DUPLEX MM MTL BEIGE

F727751802

LC ADPT DLX MM MTL LP BG /100

F727750700

LC SNAP-IN MOUNTING ADAPTOR WITH

CP30248MB

FT BLK METAL LC APC DUPLEX CSK

F727751100

LC LOW PROFILE ADAPTOR WITH ZIRC

F727752000

LC CUT OUT WITH PANEL CLIP ADAPT

F727711710

LC LOW PROFILE SNAP-IN MOUNTING

CP30249MB

FT BLK METAL SC APC SIMPLEX CSK

CP30248M3B

FT BLK METAL LC APC DUPLEX M3

CP30247M3B

FT BLK METAL LC OM4 DUPLEX M3

1061155100

LC-D EMI ADPTER 45 DEG SCREW GR

1060043262

SPX AD BEZEL TAB MX LBL BLK FC-F

1060043298

SPX AD BEZEL TAB NLG LBL BLK MTP

1060592031

SC INDUSTRIAL ADAPTER MM

About Fiber Optic Connector Adapters

The Fiber Optic Connector Adapters range covers connector interfaces for fibre-optic signal paths.

Compare connector format, fibre type, polish and alignment for the required installation. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Review Type, Convert From (Adapter End), Simplex/Duplex, Mounting Type and Color on the individual product page before choosing a part.

Fiber Optic Connector Adapters

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Optical network equipment

Optical network equipment

Fiber Optic Connector Adapters can be evaluated for optical network equipment. Match connector format, fibre type, polish and alignment to the equipment interface.

Patch-panel interfaces

Patch-panel interfaces

For patch-panel interfaces, verify Type, Convert From (Adapter End), Simplex/Duplex, Mounting Type and Color on the selected Fiber Optic Connector Adapters. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Optical verification

Optical verification

In optical verification, allow for the required mounting, routing or termination space. Check connector format, fibre type, polish and alignment before assembly.

Fiber Optic Connector Adapters inspection

Fiber Optic Connector Adapters inspection

For fiber optic connector adapters inspection, identify the original Fiber Optic Connector Adapters part number and mating arrangement. Compare Type, Convert From (Adapter End), Simplex/Duplex, Mounting Type and Color before substitution.

T1026 configuration vs. 1061660000 configuration

Compare the interfaces, construction and selection details of these two product options.

T1026 configuration

Example: T1026

  • Type Adapter
  • Convert From (Adapter End) SOC Receptacle
  • Simplex/Duplex Simplex
  • Mounting Type Free Hanging (In-Line)
  • Color Silver

1061660000 configuration

Example: 1061660000

  • Type Coupler
  • Convert From (Adapter End) SC Receptacle
  • Convert To (Adapter End) SC Receptacle
  • Simplex/Duplex Duplex
  • Mode Singlemode
  • Mounting Type Panel Mount, Flange (2 Hole)
  • Housing Material Polymer

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Fiber Optic Connector Adapters include?

This category covers connector interfaces for fibre-optic signal paths. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Examples in this category include Adapter and Coupler. Match the selected Fiber Optic Connector Adapters to the required connector format, fibre type, polish and alignment.

For Fiber Optic Connector Adapters, check Type, Convert From (Adapter End), Simplex/Duplex, Mounting Type and Color against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check connector format, fibre type, polish and alignment for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion. For Fiber Optic Connector Adapters, identify the matching system and required assembly parts before ordering.

T1026 specifies Type: Adapter and Convert From (Adapter End): SOC Receptacle. 1061660000 specifies Type: Coupler and Convert From (Adapter End): SC Receptacle. Check the full mating and installation requirements before treating different Fiber Optic Connector Adapters as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include connector format, fibre type, polish and alignment and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details