icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
FC2XO-12-10AS

OM3 FIBER ;OPTIMIZED LOW LOSS;12

EHST2B

CONN COUPLER RCPT ST-ST SIMPLEX

FAP8WBUDLCZ

FAP W/8 LC DUPL ADAPTERS (BU) ZI

1061233300

CONN COUPLER RCPT LC-LC 4-PLEX

FAPH0812BLMPO

FAP WITH 8 MPO ADAPTERS HORZ, BL

1061152117

CONN COUPLER RCPT LC-LC DUPLEX

FC4H06LKFSNV

FX UHD CASS OM4 06P SPLICING

FC4H06LKFSNB

FX UHD CASS OM4 06P SPLICING

RNGFAP6DMMQLC

RAPIDNET FIBER ADAPT 6 DUP MM LC

FC3H06LDFS

FX UHD CASS OM3 06P SPLICING

FC4H06LKFSNS

FX UHD CASS OM4 06P SPLICING

FC4H06LKFSNA

FX UHD CASS OM4 06P SPLICING

FCSH06SDFS

FX UHD CASS OS2 06P SPLICING

CMDJROLCZBL

MINI-COM KEYED (J-OR) DUPLEX LC

1061210953

CONN COUPLER RCPT LC-LC 8-PLEX

CMDBRDLCZBL

MINI-COM KEYED (B-RD) DUPLEX LC

FAP6DMMLC

CONN COUPLER RCPT LC-LC 12-PLEX

FC3H06SDFS

FX UHD CASS OM3 06P SPLICING

1061210100

CONN COUPLER RCPT LC-LC 8-PLEX

AX100536

ADAP. STRIP 6-FC, MM-SM,

1061810020

CONN COUPLER RCPT MTP-MTP 4-PLEX

FAP3WAGDSCZ

FAP W/3 SC APC DUPL ADAPTERS (AG

FO-FC-FS(FC-A2)-PBS

CONN COUPLER RCPT FC-FC SIMPLEX

FC4X06LDFS

FX ECX CASS OM4 06P SPLICING

About Fiber Optic Connector Adapters

The Fiber Optic Connector Adapters range covers connector interfaces for fibre-optic signal paths.

Compare connector format, fibre type, polish and alignment for the required installation. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Review Type, Convert From (Adapter End), Simplex/Duplex, Mounting Type and Color on the individual product page before choosing a part.

Fiber Optic Connector Adapters

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Optical network equipment

Optical network equipment

Fiber Optic Connector Adapters can be evaluated for optical network equipment. Match connector format, fibre type, polish and alignment to the equipment interface.

Patch-panel interfaces

Patch-panel interfaces

For patch-panel interfaces, verify Type, Convert From (Adapter End), Simplex/Duplex, Mounting Type and Color on the selected Fiber Optic Connector Adapters. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Optical verification

Optical verification

In optical verification, allow for the required mounting, routing or termination space. Check connector format, fibre type, polish and alignment before assembly.

Fiber Optic Connector Adapters inspection

Fiber Optic Connector Adapters inspection

For fiber optic connector adapters inspection, identify the original Fiber Optic Connector Adapters part number and mating arrangement. Compare Type, Convert From (Adapter End), Simplex/Duplex, Mounting Type and Color before substitution.

T1026 configuration vs. 1061660000 configuration

Compare the interfaces, construction and selection details of these two product options.

T1026 configuration

Example: T1026

  • Type Adapter
  • Convert From (Adapter End) SOC Receptacle
  • Simplex/Duplex Simplex
  • Mounting Type Free Hanging (In-Line)
  • Color Silver

1061660000 configuration

Example: 1061660000

  • Type Coupler
  • Convert From (Adapter End) SC Receptacle
  • Convert To (Adapter End) SC Receptacle
  • Simplex/Duplex Duplex
  • Mode Singlemode
  • Mounting Type Panel Mount, Flange (2 Hole)
  • Housing Material Polymer

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Fiber Optic Connector Adapters include?

This category covers connector interfaces for fibre-optic signal paths. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Examples in this category include Adapter and Coupler. Match the selected Fiber Optic Connector Adapters to the required connector format, fibre type, polish and alignment.

For Fiber Optic Connector Adapters, check Type, Convert From (Adapter End), Simplex/Duplex, Mounting Type and Color against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check connector format, fibre type, polish and alignment for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion. For Fiber Optic Connector Adapters, identify the matching system and required assembly parts before ordering.

T1026 specifies Type: Adapter and Convert From (Adapter End): SOC Receptacle. 1061660000 specifies Type: Coupler and Convert From (Adapter End): SC Receptacle. Check the full mating and installation requirements before treating different Fiber Optic Connector Adapters as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include connector format, fibre type, polish and alignment and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details