icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
2175112111

L1NK 250 F-S 75MM 24 AWG L

2175111123

L1NK 250 F-S 225MM 22 AWG

0502128000-04-S4-D

4" PRE-CRIMP 1854 SL001 SLATE

2177932105

SQUBA 1.8 M-S 450MM 24 AWG LEADS

2177931101

SQUBA 1.8 M-S 75MM 24 AWG LEADS

H3ABT-10106-Y4

JUMPER-H1506TR/A2015Y/H1504TR 6"

H3ABT-10106-A4

JUMPER-H1506TR/A2015A/H1504TR 6"

H4BBT-10108-V6

JUMPER-H9992TR/1853VI/H9992TR 8"

2153461103

SQUBA 3.6 F-S 225MM 20 AW

2177932125

SQUBA 1.8 M-S 450MM 22 AWG LEADS

2175102122

L1NK 250 F-F 150MM 22 AWG

2177912125

SQUBA 1.8 F-S 450MM 22 AWG LEADS

2177901123

SQUBA 1.8 F-F 225MM 22 AWG LEADS

2177932121

SQUBA 1.8 M-S 75MM 22 AWG LEADS

2177901125

SQUBA 1.8 F-F 450MM 22 AWG LEADS

2177902121

SQUBA 1.8 F-F 75MM 22 AWG LEADS

2175112114

L1NK 250 F-S 300MM 24 AWG

2175111105

L1NK 250 F-F 450MM 26 AWG

2175112121

L1NK 250 F-S 75MM 22 AWG L

2177921121

SQUBA 1.8 M-M 75MM 22 AWG LEADS

2175111113

L1NK 250 F-S 225MM 24 AWG

2175111114

L1NK 250 F-S 300MM 24 AWG

2175111101

L1NK 250 F-F 75MM 26 AWG L

2177912124

SQUBA 1.8 F-S 300MM 22 AWG LEADS

About Jumper Wires, Pre-Crimped Leads

Jumper Wires and Pre-Crimped Leads includes individual jumper leads and wires supplied with crimped contacts.

When selecting an assembly, check contact series and gender, compatible housing, wire gauge, length and finish.

A pin or socket must fit the selected housing cavity and wire range. Similar-looking crimp contacts are not necessarily interchangeable.

Jumper Wires, Pre-Crimped Leads

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Prototype jumper wiring

Prototype jumper wiring

Match contact series and gender and verify the intended pin assignment.

Housing assembly

Housing assembly

Check housing cavity compatibility and contact retention for the wire size.

Board-to-wire connections

Board-to-wire connections

Confirm the mating series, wire gauge and circuit arrangement.

Harness repair preparation

Harness repair preparation

Identify the exact terminal and housing references rather than choosing by appearance.

Pre-crimped pin leads vs. Pre-crimped socket leads

Compare the interfaces, construction and selection details of these two product options.

Pre-crimped pin leads

Representative listed part: 0460121141-04-L0.

  • Contact End Pin to Cable (Round)
  • Wire Gauge 20 AWG
  • Contact Finish Tin
  • Contact Finish Thickness 100.0碌in (2.54碌m)
  • Length 4.00" (101.60mm)

Pre-crimped socket leads

Representative listed part: H3BXT-10105-B8.

  • Contact End Socket to Cable (Round)
  • Wire Gauge 28 AWG
  • Contact Finish Tin
  • Contact Finish Thickness Not specified for this example
  • Length 5.00" (127.00mm)

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

Do I need pre-crimped pin contacts or socket contacts?

Match the Contact End to the mating housing and contact system. Check whether the selected lead has one prepared end or contacts at both ends, and provide the housing reference if compatibility is unclear.

Compare the listed Wire Gauge with the equipment, contact and housing requirements. Include the electrical load and installation conditions when confirmation is needed; gauge alone does not establish an assembly rating.

Check the listed Contact Finish and thickness against the mating contact specification and your harness requirements. Request confirmation for the exact contact system rather than treating tin, gold and nickel variants as interchangeable.

A pin or socket must fit the selected housing cavity and wire range. Similar-looking crimp contacts are not necessarily interchangeable.

0460121141-04-L0 is shown as pre-crimped pin leads, with Contact End listed as Pin to Cable (Round). H3BXT-10105-B8 is shown as pre-crimped socket leads, with Contact End listed as Socket to Cable (Round). These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare contact series and gender, compatible housing, wire gauge, length and finish. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required contact series and gender, compatible housing, wire gauge, length and finish. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details