icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
2178432124

MIZU-P25 M-S 300MM 20 AWG LEAD U

2175011123

PRE-CRIMP BK F-S 225MM 22AWG

2175012102

PRE-CRIMP RED F-S 150MM 26AWG

2175012115

PRE-CRIMP RED F-S 450MM 24AWG

2175002123

PRE-CRIMP RED F-F 225MM 22AWG

2175011121

PRE-CRIMP BK F-S 75MM 22AWG

2175012113

PRE-CRIMP RED F-S 225MM 24AWG

10164065-H0030YYLF

COMBOLOCKCRIMPED LEAD WITH TIN P

2163001122

MX150 F-F 150MM 14 AWG LEADS BK

10162767-L0030YYLF

MICROSPACECRIMPED LEAD WITH TIN

10164064-M0030YYLF

COMBOLOCKCRIMPED LEAD WITH TIN P

2174712101

ULTRA-FIT F-S 75MM 20 AWG LEADS

2174712103

ULTRA-FIT F-S 225MM 20 AWG LEADS

2174712123

ULTRA-FIT F-S 225MM 16 AWG LEADS

2174712112

ULTRA-FIT F-S 150MM 18 AWG LEADS

2174702125

ULTRA-FIT F-F 450MM 16 AWG LEADS

2174711112

ULTRA-FIT F-S 150MM 18 AWG LEADS

2174701122

ULTRA-FIT F-F 150MM 16 AWG LEADS

2163011202

MX150 F-S 150MM 18 AWG LEADS BK

2163012123

MX150 F-S 225MM 14 AWG LEADS RD

2163011123

MX150 F-S 225MM 14 AWG LEADS BK

2153462104

SQUBA 3.6 F-S 300MM 20 AW

2175202122

MIZU-P25 F-F 150MM 0.5 SQMM LEAD

2175212121

MIZU-P25 F-S 75MM 0.5 SQMM LEAD

About Jumper Wires, Pre-Crimped Leads

Jumper Wires and Pre-Crimped Leads includes individual jumper leads and wires supplied with crimped contacts.

When selecting an assembly, check contact series and gender, compatible housing, wire gauge, length and finish.

A pin or socket must fit the selected housing cavity and wire range. Similar-looking crimp contacts are not necessarily interchangeable.

Jumper Wires, Pre-Crimped Leads

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Prototype jumper wiring

Prototype jumper wiring

Match contact series and gender and verify the intended pin assignment.

Housing assembly

Housing assembly

Check housing cavity compatibility and contact retention for the wire size.

Board-to-wire connections

Board-to-wire connections

Confirm the mating series, wire gauge and circuit arrangement.

Harness repair preparation

Harness repair preparation

Identify the exact terminal and housing references rather than choosing by appearance.

Pre-crimped pin leads vs. Pre-crimped socket leads

Compare the interfaces, construction and selection details of these two product options.

Pre-crimped pin leads

Representative listed part: 0460121141-04-L0.

  • Contact End Pin to Cable (Round)
  • Wire Gauge 20 AWG
  • Contact Finish Tin
  • Contact Finish Thickness 100.0碌in (2.54碌m)
  • Length 4.00" (101.60mm)

Pre-crimped socket leads

Representative listed part: H3BXT-10105-B8.

  • Contact End Socket to Cable (Round)
  • Wire Gauge 28 AWG
  • Contact Finish Tin
  • Contact Finish Thickness Not specified for this example
  • Length 5.00" (127.00mm)

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

Do I need pre-crimped pin contacts or socket contacts?

Match the Contact End to the mating housing and contact system. Check whether the selected lead has one prepared end or contacts at both ends, and provide the housing reference if compatibility is unclear.

Compare the listed Wire Gauge with the equipment, contact and housing requirements. Include the electrical load and installation conditions when confirmation is needed; gauge alone does not establish an assembly rating.

Check the listed Contact Finish and thickness against the mating contact specification and your harness requirements. Request confirmation for the exact contact system rather than treating tin, gold and nickel variants as interchangeable.

A pin or socket must fit the selected housing cavity and wire range. Similar-looking crimp contacts are not necessarily interchangeable.

0460121141-04-L0 is shown as pre-crimped pin leads, with Contact End listed as Pin to Cable (Round). H3BXT-10105-B8 is shown as pre-crimped socket leads, with Contact End listed as Socket to Cable (Round). These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare contact series and gender, compatible housing, wire gauge, length and finish. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required contact series and gender, compatible housing, wire gauge, length and finish. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details