icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
2153411111

MINI-FIT JR. F-S 75MM 18 AWG BK

2157111113

CLIK-MATE 1.5 M-S 225MM 26 AWG L

2149202222

PICOBLADE PRECRIMP 26AWG RD F-F

2149202224

PICOBLADE PRECRIMP 26AWG RD F-F

2149202225

PICOBLADE PRECRIMP 26AWG RD F-F

2149202221

PICOBLADE PRECRIMP 26AWG RD F-F

2157102124

CLIK-MATE 1.5 M-M 300MM 24 AWG L

2147631115

MICROFIT 3.0 M-S 450MM 20AWG LEA

2157111104

CLIK-MATE 1.5 M-S 300MM 28 AWG L

2149221222

PICOBLADE PRECRIMP 26AWG RD M-M

2157112125

CLIK-MATE 1.5 M-S 450MM 24 AWG L

2149231112

PICOBLADE PRECRIMP 28AWG BK M-S

2149211212

PICOBLADE PRECRIMP 26AWG BK F-S

2149231113

PICOBLADE PRECRIMP 28AWG BK M-S

2149221211

PICOBLADE PRECRIMP 26AWG BK M-M

797582024

KK 300MM 24AWG PRE-CRIMPED LEAD

797581020

SHERLOCK 150MM 26AWG PRE-CRIMPED

797581002

MICRO-CLASP 300MM 24AWG PRE-CRIM

797582038

PRE-CRIMPED LEAD MEGA-FIT FEM

797581021

SHERLOCK 300MM 26AWG PRE-CRIMPED

797581060

PICOBLADE PRE-CRP LEAD 304MM

797581011

CLICK-MATE 300MM 24AWG PRE-CRIMP

797581010

PICO-EZMATE 300MM 28AWG PRE-CRIM

797581004

PICO-LOCK 300MM 24AWG PRE-CRIMPE

About Jumper Wires, Pre-Crimped Leads

Jumper Wires and Pre-Crimped Leads includes individual jumper leads and wires supplied with crimped contacts.

When selecting an assembly, check contact series and gender, compatible housing, wire gauge, length and finish.

A pin or socket must fit the selected housing cavity and wire range. Similar-looking crimp contacts are not necessarily interchangeable.

Jumper Wires, Pre-Crimped Leads

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Prototype jumper wiring

Prototype jumper wiring

Match contact series and gender and verify the intended pin assignment.

Housing assembly

Housing assembly

Check housing cavity compatibility and contact retention for the wire size.

Board-to-wire connections

Board-to-wire connections

Confirm the mating series, wire gauge and circuit arrangement.

Harness repair preparation

Harness repair preparation

Identify the exact terminal and housing references rather than choosing by appearance.

Pre-crimped pin leads vs. Pre-crimped socket leads

Compare the interfaces, construction and selection details of these two product options.

Pre-crimped pin leads

Representative listed part: 0460121141-04-L0.

  • Contact End Pin to Cable (Round)
  • Wire Gauge 20 AWG
  • Contact Finish Tin
  • Contact Finish Thickness 100.0碌in (2.54碌m)
  • Length 4.00" (101.60mm)

Pre-crimped socket leads

Representative listed part: H3BXT-10105-B8.

  • Contact End Socket to Cable (Round)
  • Wire Gauge 28 AWG
  • Contact Finish Tin
  • Contact Finish Thickness Not specified for this example
  • Length 5.00" (127.00mm)

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

Do I need pre-crimped pin contacts or socket contacts?

Match the Contact End to the mating housing and contact system. Check whether the selected lead has one prepared end or contacts at both ends, and provide the housing reference if compatibility is unclear.

Compare the listed Wire Gauge with the equipment, contact and housing requirements. Include the electrical load and installation conditions when confirmation is needed; gauge alone does not establish an assembly rating.

Check the listed Contact Finish and thickness against the mating contact specification and your harness requirements. Request confirmation for the exact contact system rather than treating tin, gold and nickel variants as interchangeable.

A pin or socket must fit the selected housing cavity and wire range. Similar-looking crimp contacts are not necessarily interchangeable.

0460121141-04-L0 is shown as pre-crimped pin leads, with Contact End listed as Pin to Cable (Round). H3BXT-10105-B8 is shown as pre-crimped socket leads, with Contact End listed as Socket to Cable (Round). These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare contact series and gender, compatible housing, wire gauge, length and finish. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required contact series and gender, compatible housing, wire gauge, length and finish. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details