Prototype jumper wiring
Match contact series and gender and verify the intended pin assignment.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 0845250032-11-A7-D | 11" PRE-CRIMP A1858/19 ORANGE |
| 0845250032-11-R9-D | 11" PRE-CRIMP A1857/19 RED |
| 0845250032-10-Y9-D | 10" PRE-CRIMP A1857/19 YELLOW |
| 0845250032-11-N7-D | 11" PRE-CRIMP A1858/19 BROWN |
| 0845250032-10-S7-D | 10" PRE-CRIMP A1858/19 SLATE |
| 0845250032-11-L9-D | 11" PRE-CRIMP A1857/19 BLUE |
| 0845250032-11-N9-D | 11" PRE-CRIMP A1857/19 BROWN |
| 0845250032-11-B7-D | 11" PRE-CRIMP A1858/19 BLACK |
| 0845250032-10-A9-D | 10" PRE-CRIMP A1857/19 ORANGE |
| 0845250032-10-B7-D | 10" PRE-CRIMP A1858/19 BLACK |
| 0845250032-10-L7-D | 10" PRE-CRIMP A1858/19 BLUE |
| 0845250032-10-L9-D | 10" PRE-CRIMP A1857/19 BLUE |
| 0845250032-10-N7-D | 10" PRE-CRIMP A1858/19 BROWN |
| 0845250032-10-B9-D | 10" PRE-CRIMP A1857/19 BLACK |
| 0845250032-08-Y7-D | 8" PRE-CRIMP A1858/19 YELLOW |
| 0845250032-08-W7-D | 8" PRE-CRIMP A1858/19 WHITE |
| 0845250032-08-S7-D | 8" PRE-CRIMP A1858/19 SLATE |
| 0845250032-08-V9-D | 8" PRE-CRIMP A1857/19 VIOLET |
| 0845250032-08-N7-D | 8" PRE-CRIMP A1858/19 BROWN |
| 0845250032-08-A7-D | 8" PRE-CRIMP A1858/19 ORANGE |
| 0845250032-08-R9-D | 8" PRE-CRIMP A1857/19 RED |
| 0845250032-08-A9-D | 8" PRE-CRIMP A1857/19 ORANGE |
| 0845250032-08-G9-D | 8" PRE-CRIMP A1857/19 GREEN |
| 0845250032-08-L9-D | 8" PRE-CRIMP A1857/19 BLUE |
Jumper Wires and Pre-Crimped Leads includes individual jumper leads and wires supplied with crimped contacts.
When selecting an assembly, check contact series and gender, compatible housing, wire gauge, length and finish.
A pin or socket must fit the selected housing cavity and wire range. Similar-looking crimp contacts are not necessarily interchangeable.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Match contact series and gender and verify the intended pin assignment.
Check housing cavity compatibility and contact retention for the wire size.
Confirm the mating series, wire gauge and circuit arrangement.
Identify the exact terminal and housing references rather than choosing by appearance.
Compare the interfaces, construction and selection details of these two product options.
Representative listed part: 0460121141-04-L0.
Representative listed part: H3BXT-10105-B8.
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
Match the Contact End to the mating housing and contact system. Check whether the selected lead has one prepared end or contacts at both ends, and provide the housing reference if compatibility is unclear.
Compare the listed Wire Gauge with the equipment, contact and housing requirements. Include the electrical load and installation conditions when confirmation is needed; gauge alone does not establish an assembly rating.
Check the listed Contact Finish and thickness against the mating contact specification and your harness requirements. Request confirmation for the exact contact system rather than treating tin, gold and nickel variants as interchangeable.
A pin or socket must fit the selected housing cavity and wire range. Similar-looking crimp contacts are not necessarily interchangeable.
0460121141-04-L0 is shown as pre-crimped pin leads, with Contact End listed as Pin to Cable (Round). H3BXT-10105-B8 is shown as pre-crimped socket leads, with Contact End listed as Socket to Cable (Round). These are two examples, not a statement that every part has either specification.
Provide the original manufacturer and complete part number, or a drawing. For this range, compare contact series and gender, compatible housing, wire gauge, length and finish. Identify any requirement not covered by the listing rather than selecting only by length or appearance.
Supply a mating-interface drawing and the required contact series and gender, compatible housing, wire gauge, length and finish. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details