LGH equipment interfaces
Match the exact LGH series and barrel depth to the documented equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 862549-4 | LGH-1 PLUG TO CBL 16AWG 12.38" |
| 862549-7 | LGH-1 PLUG TO CBL 16AWG 21.38" |
| 5-865751-4 | LGH-2 PLG TO J1-21 SCKT 8.75" |
| 862550-1 | LGH-1 PLG TO LGH-1 PLG 16AWG 6" |
| 837975-6 | LGH-3 PLUG TO CBL 16AWG 6.25" |
| 864954-1 | CIRC 6P PLUG TO 6P PLG 16AWG 21" |
| 859097-1 | LGH-1/2 PLG TO LGH-1/2 PLG 5.76' |
| 849099-4 | LGH-1 PLUG TO CBL 16AWG 36" |
| 868361-1 | LGH-1L PLUG TO CBL 16AWG 6.62' |
| 859474-4 | LGH-1 PLUG TO CBL 16AWG 3.33' |
| 868749-1 | LGH-1/2 PLG TO LGH-1/2 PLG 24" |
| 869084-7 | LGH-3 PLUG TO CBL 16AWG 24.38" |
| 846290-4 | LGH-4 PLUG TO CBL 16AWG 4.03' |
| 839565-7 | LGH-2 PLG TO LGH-2 PLG 16AWG 10' |
| 862602-4 | LGH-1/2L PLG TO J1-21 SCKT 6" |
| 863534-7 | LGH-1/2L PLG TO CBL 16AWG 21.38" |
| 848076-9 | LGH-3 PLUG TO CBL 16AWG 6.03' |
| 868330-2 | LGH-1L PLUG TO LGH-1L PLUG 11" |
| 2-830637-8 | LGH-1L PLUG TO CBL 16AWG 24.38" |
| 846290-1 | LGH-4 PLUG TO CBL 16AWG 12.38" |
| 2-837975-5 | LGH-3 PLUG TO CBL 16AWG 40.03' |
| 2-839564-9 | LGH-2 PLUG TO CBL 16AWG 18.38" |
| 863984-1 | CIRC 5POS RCPT TO WIRE 13.48" |
| 868399-3 | LGH-1/2 PLUG TO CBL 16AWG 15.38" |
LGH Cable Assemblies includes LGH connector cable assemblies for specified equipment interfaces.
When selecting an assembly, check LGH series, barrel depth, cable length, shielding and required voltage rating.
LGH connections require the exact mating interface and documented electrical requirements. Neither the family name nor a photograph establishes a safe voltage rating.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Match the exact LGH series and barrel depth to the documented equipment interface.
Use the documented electrical requirements and approved servicing procedure.
Check shielding, clearances and cable routing against the equipment design.
Verify the mating references and required rating; the family name or image does not establish voltage suitability.
Compare the interfaces, construction and selection details of these two product options.
Representative listed part: 2-849099-3.
Representative listed part: 3-839565-1.
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
Match the full Connector Type and Barrel Depth to the equipment mating interface. Provide the existing connector reference or drawing so the required LGH construction can be checked accurately.
Compare the voltage stated for the exact part with the equipment documentation and required operating conditions. Do not transfer a rating between LGH sizes or infer the complete installation rating from appearance.
Review Shielding, Wire Gauge, connector construction and cap material for the listed part. Include termination and installation requirements so the shielding arrangement can be confirmed for the intended assembly.
LGH connections require the exact mating interface and documented electrical requirements. Neither the family name nor a photograph establishes a safe voltage rating.
2-849099-3 is shown as shielded lgh cable construction, with Shielding listed as Shielded. 3-839565-1 is shown as unshielded lgh cable construction, with Shielding listed as Unshielded. These are two examples, not a statement that every part has either specification.
Provide the original manufacturer and complete part number, or a drawing. For this range, compare LGH series, barrel depth, cable length, shielding and required voltage rating. Identify any requirement not covered by the listing rather than selecting only by length or appearance.
Supply a mating-interface drawing and the required LGH series, barrel depth, cable length, shielding and required voltage rating. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details