icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
63613-1

CONN MAG TERM 42-52AWG POKE-IN

342384-1

CONN MAG TERM CRIMP

62658-1

CONN MAG TERM 20-22AWG QC 0.250

41900

CONN MAG TERM 3000-7000CMA CRIMP

964110-1

CONN MAG TERM 20-23AWG IDC

6-1601046-1

CONN MAG TERM 18-34AWG IDC

63444-1

CONN MAG TERM 31-33AWG PIN

63328-1

CONN MAG TERM 27-30AWG QC 0.250

62958-1

CONN MAG TERM 26-29AWG PCB

4-1601006-2

CONN MAG TERM 18-34AWG QC 0.187

4-1601142-1

CONN MAG TERM 20-23AWG QC 0.187

62833-1

CONN MAG TERM 16.5-20AWG IDC

62652-1

CONN MAG TERM 23-27AWG QC 0.250

62928-1

CONN MAG TERM 28-31AWG PCB

62903-1

CONN MAG TERM 18-20AWG IDC

63973-1

CONN MAG TERM 23-27AWG TAB

63459-3

CONN MAG TERM 15-16AWG QC 0.250

63641-1

CONN MAG TERM 24-28AWG CRIMP

2-1601243-2

CONN MAG TERM 18-34AWG TAB

63663-1

CONN MAG TERM 20-22AWG QC 0.187

4-1601004-1

CONN MAG TERM 18-34AWG QC 0.187

41766

CONN MAG TERM 3000-7000CMA CRIMP

62923-2

CONN MAG TERM 17-19AWG QC 0.250

2-1601149-2

CONN MAG TERM 21.5AWG IDC

About Magnetic Wire Connectors

The Magnetic Wire Connectors range covers terminals for connecting fine enamelled magnet wire.

Compare wire diameter, enamel system, insulation displacement geometry and termination method for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Style, Terminal Type, Size, Termination and Wire Gauge on the individual product page before choosing a part.

Magnetic Wire Connectors

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Coil terminations

Coil terminations

Magnetic Wire Connectors can be evaluated for coil terminations. Match wire diameter, enamel system, insulation displacement geometry and termination method to the equipment interface.

Motor wiring assemblies

Motor wiring assemblies

For motor wiring assemblies, verify Style, Terminal Type, Size, Termination and Wire Gauge on the selected Magnetic Wire Connectors. Use the exact mating part and installation dimensions specified for the selected item.

Termination inspection

Termination inspection

In termination inspection, allow for the required mounting, routing or termination space. Check wire diameter, enamel system, insulation displacement geometry and termination method before assembly.

Magnetic Wire Connectors inspection

Magnetic Wire Connectors inspection

For magnetic wire connectors inspection, identify the original Magnetic Wire Connectors part number and mating arrangement. Compare Style, Terminal Type, Size, Termination and Wire Gauge before substitution.

62935-9 configuration vs. 63459-2 configuration

Compare the interfaces, construction and selection details of these two product options.

62935-9 configuration

Example: 62935-9

  • Style 300
  • Terminal Type Poke-In Terminal
  • Size 2
  • Termination IDC
  • Wire Gauge 23-27 AWG
  • Features Locking

63459-2 configuration

Example: 63459-2

  • Style 500
  • Terminal Type Box IDC
  • Size 4
  • Termination Quick Connect
  • Wire Gauge 15-16 AWG
  • Features QC .250

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Magnetic Wire Connectors include?

This category covers terminals for connecting fine enamelled magnet wire. Use the exact mating part and installation dimensions specified for the selected item.

Examples in this category include Poke-In Terminal, Box IDC and Tab Receptacle. Match the selected Magnetic Wire Connectors to the required wire diameter, enamel system, insulation displacement geometry and termination method.

For Magnetic Wire Connectors, check Style, Terminal Type, Size, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check wire diameter, enamel system, insulation displacement geometry and termination method for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Use the exact mating part and installation dimensions specified for the selected item. For Magnetic Wire Connectors, identify the matching system and required assembly parts before ordering.

62935-9 specifies Style: 300 and Terminal Type: Poke-In Terminal. 63459-2 specifies Style: 500 and Terminal Type: Box IDC. Check the full mating and installation requirements before treating different Magnetic Wire Connectors as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include wire diameter, enamel system, insulation displacement geometry and termination method and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details