Network equipment
Modular Connector Adapters can be evaluated for network equipment. Match position count, contact count, wiring scheme and mounting to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 1-2120875-1 | VARIANT 14 COUPLER;RJ45,CAT6A,8P |
| 1546415-1 | CONN MOD COUPLER 6P6C TO 6P6C |
| 1-2120871-1 | VARIANT 14;JACK METAL,RJ45,CAT6A |
| IAEBHC6 | CATEGORY 6, RJ45, 8-POSITION, 8- |
| IAEF7JMA | LC DUPLEX BULKHEAD FIBER ADAPTER |
| 1.11.099.201/0010 | RAMO 30 F, RJ45, ROUND COLLAR, F |
| E100623 000S1 | CAT6 DIN RAIL FTP COUPLER |
| E100A21 000S1 | CAT6A DIN RAIL FTP JACK T568B |
| AX104214 | CAT6+ KCONN RJ45 COUPLER,WH |
| AX104016 | 10GX KCONN RJ45 COUPLER,RD |
| AX104213 | CAT6+ KCONN RJ45 COUPLER,GY |
| AX104017 | 10GX KCONN RJ45 COUPLER,YL |
| AX104015 | 10GX KCONN RJ45 COUPLER,OR |
| AX104018 | 10GX KCONN RJ45 COUPLER,GN |
| AX104210 | CAT6+ KCONN RJ45 COUPLER,BL |
| SCRE-01 | CONN MOD COUPLER 8P8C TO 8P8C |
| TM5RL-88-JJ(51) | CONN MOD COUPLER 8P8C TO 8P8C |
| TM5RL-88-JJ | CONN MOD COUPLER 8P8C TO 8P8C |
| TM5RJ3-88(50) | CONN MOD JACK 8P8C R/A SHIELDED |
| 10120051002 | CONN MOD ADAPTER 8P4C TO 8P8C |
| 9352250331 | CONN MOD COUPLER 8P8C TO 8P8C |
| 9453151100 | HAN3A RJ45 CAT5 PFT 5P |
| 9452150701 | DEVICE HOUSING KIT (BULKHEAD) |
| 9452151102 | CONN MOD COUPLER 8P8C TO 8P8C |
The Modular Connector Adapters range covers modular plug and jack systems for the specified communications interface.
Compare position count, contact count, wiring scheme and mounting for the required installation. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.
Review Convert From (Adapter End), Convert To (Adapter End), Type, Features and Ingress Protection on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Modular Connector Adapters can be evaluated for network equipment. Match position count, contact count, wiring scheme and mounting to the equipment interface.
For communications panels, verify Convert From (Adapter End), Convert To (Adapter End), Type, Features and Ingress Protection on the selected Modular Connector Adapters. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.
In interface testing, allow for the required mounting, routing or termination space. Check position count, contact count, wiring scheme and mounting before assembly.
For modular connector adapters inspection, identify the original Modular Connector Adapters part number and mating arrangement. Compare Convert From (Adapter End), Convert To (Adapter End), Type, Features and Ingress Protection before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 936014793
Example: AT-AG-2X8/8
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers modular plug and jack systems for the specified communications interface. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.
Examples in this category include Jack, 8p8c (RJ45) and Jack, 8p8c (RJ45) SealJack. Match the selected Modular Connector Adapters to the required position count, contact count, wiring scheme and mounting.
For Modular Connector Adapters, check Convert From (Adapter End), Convert To (Adapter End), Type, Features and Ingress Protection against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check position count, contact count, wiring scheme and mounting for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion. For Modular Connector Adapters, identify the matching system and required assembly parts before ordering.
936014793 specifies Convert From (Adapter End): Jack, 8p8c (RJ45) and Convert To (Adapter End): Jack, 8p8c (RJ45). AT-AG-2X8/8 specifies Convert From (Adapter End): Jack, 8p8c (RJ45) and Convert To (Adapter End): Jack, 8p8c (RJ45). Check the full mating and installation requirements before treating different Modular Connector Adapters as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include position count, contact count, wiring scheme and mounting and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details