icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
10123196-200S010

CABLE MINISAS HD 4X M-M 10M

10123196-200S005

CABLE MINISAS HD 4X M-M 5M

10123196-200S001

CABLE MINISAS HD 4X M-M 1M

10123196-200S003

CABLE MINISAS HD 4X M-M 3M

ICD120GVP2420-03

CXP TO QSFP AOC 3M

101211784040LF

QSFP-EDR PASSIVE 26AWG 4M

101211784045LF

QSFP-EDR PASSIVE 26AWG 4.5M

101211784025LF

QSFP-EDR PASSIVE 26AWG 2.5M

10121178-4030LF

QSFP-EDR PASSIVE 26AWG 3M

ICD150GVP2410-03

CXP AOC 150GBS 3M

101211784050LF

QSFP-EDR PASSIVE 26AWG 5M

101211784035LF

QSFP-EDR PASSIVE 26AWG 3.5M

101211784010LF

QSFP-EDR PASSIVE 26AWG 1M

ICD056GVP163D-20

FDR QSFP-QSFP 20M

AFBR-7QER15Z

40G QSFP+ AOC

101211784020LF

QSFP-EDR PASSIVE 26AWG 2M

101211782030LF

QSFP-EDR PASSIVE 30AWG 3M

101211784015LF

QSFP-EDR PASSIVE 26AWG 1.5M

AFBR-7QER20Z

40G QSFP+ AOC

101211782020LF

QSFP-EDR PASSIVE 30AWG 2M

101211782010LF

QSFP-EDR PASSIVE 30AWG 1M

AFBR-7IER15Z

10G SFP+ AOC

AFBR-7QER07Z

40G QSFP+ AOC

101211782005LF

QSFP-EDR PASSIVE 30AWG .5M

About Pluggable Cables

Pluggable Cable Assemblies includes pluggable equipment interconnects with interface and retention options.

When selecting an assembly, check connector family, protocol support, active or passive design and retention.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

Pluggable Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

High-speed equipment links

High-speed equipment links

Match the connector family, protocol and supported equipment port.

Rack interconnect routing

Rack interconnect routing

Check cable length, retention and active or passive design against the port requirements.

Storage interface cabling

Storage interface cabling

Confirm the exact interface and equipment compatibility before replacement.

Port retention checks

Port retention checks

Check latch access and connector orientation as well as electrical compatibility.

Shielded pluggable cables vs. Unshielded pluggable cables

Compare the interfaces, construction and selection details of these two product options.

Shielded pluggable cables

Representative listed part: 1110251208.

  • Cable Connectors CXP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Shielded
  • Features Pull Tab
  • Frequency - Max 120Gbps

Unshielded pluggable cables

Representative listed part: 2015911010.

  • Cable Connectors QSFP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Unshielded
  • Features Pull Tab
  • Frequency - Max 56Gbps

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

How do I match a pluggable cable to an equipment port?

Check Cable Connectors, Connector Type and Gender at both ends, together with the equipment-supported interface. Similar module housings do not establish compatible electrical or signalling requirements.

Use the Features attribute and the equipment compatibility information for the exact part. Confirm the supported link and length; do not assume an active and passive assembly are direct substitutes.

Review Fastening Type, pull-tab clearance and Cable Type before specifying the installation. Provide the port spacing and routing constraints if the connector body or release mechanism has limited access.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

1110251208 is shown as shielded pluggable cables, with Shielding listed as Shielded. 2015911010 is shown as unshielded pluggable cables, with Shielding listed as Unshielded. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare connector family, protocol support, active or passive design and retention. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required connector family, protocol support, active or passive design and retention. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details