icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
2058973302

ZQ - 4ZS 56G PAM4 CABLE ASSY 3.0

1003451154

ZQ - 4ZS 25G CBL 1.5M 30AWG (W/D

2058991102

ZQSFP+ TO 2ZQSFP=56G_PAM4 1M 30A

1001890610

4XHD STR TO STR, 610MM

1004364012

4X NPIO TO HD, .5M

1004361106

4X NPIO DATA CABLE, .550M

1003463306

ZQSFP+TO 2ZQSFP+ BO CBL 26AWG 3.

1004361107

4X NPIO DATA CABLE, .650M

1003461156

ZQSFP+TO 2ZQSFP+ BO CBL 30AWG 1.

1003463302

ZQSFP+ TO 2ZQSFP+ 3M, 26 AWG

1003461102

ZQSFP+ X2ZQSFP+ CBLASY 1M,30AWG

1003461206

ZQSFP+TO 2ZQSFP+ BO CBL 30AWG 2.

1001711454

HD 4X STR *2 TO HD 4X RAD *2 380

1002220101

4X INT. HD SHRT BDY RIGHT 0.300M

1003451204

ZQ - 4ZS 25G CBL 2.0M 30AWG (W/D

1003451304

ZQ - 4ZS 25G CBL 3.0M 30AWG (W/D

1001900100

8X INT. HD STR SHORT 0.152M CTRL

2058993102

ZQSFP+ TO 2ZQSFP=56G_PAM4 1M 26A

2058993202

ZQSFP+ TO 2ZQSFP=56G_PAM4 2M 26A

2058961202

2.0M, 30AWG ZSFP+ 56G PAM-4 CABL

2058563015

QSFP-DD-8ZSFP 28AWG 1.5M CABLE A

1002210301

4X INT. HD STR SHORT 0.300MM CTR

1002210104

4X INT. HD STR SHORT 1.000M CTRL

1001900200

8X INT. HD STR SHORT 0.152M CTRL

About Pluggable Cables

Pluggable Cable Assemblies includes pluggable equipment interconnects with interface and retention options.

When selecting an assembly, check connector family, protocol support, active or passive design and retention.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

Pluggable Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

High-speed equipment links

High-speed equipment links

Match the connector family, protocol and supported equipment port.

Rack interconnect routing

Rack interconnect routing

Check cable length, retention and active or passive design against the port requirements.

Storage interface cabling

Storage interface cabling

Confirm the exact interface and equipment compatibility before replacement.

Port retention checks

Port retention checks

Check latch access and connector orientation as well as electrical compatibility.

Shielded pluggable cables vs. Unshielded pluggable cables

Compare the interfaces, construction and selection details of these two product options.

Shielded pluggable cables

Representative listed part: 1110251208.

  • Cable Connectors CXP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Shielded
  • Features Pull Tab
  • Frequency - Max 120Gbps

Unshielded pluggable cables

Representative listed part: 2015911010.

  • Cable Connectors QSFP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Unshielded
  • Features Pull Tab
  • Frequency - Max 56Gbps

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

How do I match a pluggable cable to an equipment port?

Check Cable Connectors, Connector Type and Gender at both ends, together with the equipment-supported interface. Similar module housings do not establish compatible electrical or signalling requirements.

Use the Features attribute and the equipment compatibility information for the exact part. Confirm the supported link and length; do not assume an active and passive assembly are direct substitutes.

Review Fastening Type, pull-tab clearance and Cable Type before specifying the installation. Provide the port spacing and routing constraints if the connector body or release mechanism has limited access.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

1110251208 is shown as shielded pluggable cables, with Shielding listed as Shielded. 2015911010 is shown as unshielded pluggable cables, with Shielding listed as Unshielded. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare connector family, protocol support, active or passive design and retention. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required connector family, protocol support, active or passive design and retention. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details