icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
2040423302

4X EXT. ZHD TO ZHD DISCRETE 26AW

2067233025

QSFP-DD-8ZSFP AWG28 2.5M 25G

747522901

SFP+ COPPER PATCH CABLE 10G, 9M,

1064152107

IPASS+ HD, MINI SAS SERIES, AOC,

747579605

R6,CBL,SAS,QSFP-QSFP,CU,100 OHM,

747641053

QSFP+TO4SFP+CUBRKOUTCBLE 1.5M 30

2015913252

DDQ TO DDQ 2.5M 26AWG

747529747

SFP+ CABLE ASSY 10G, 6000MM 24AW

747529746

SFP+ CABLE ASSY 10G, 5000MM 26AW

747529015

SFP+ COPPER PATCH CABLE 10G - 13

2015913017

DDQ TO DDQ 1.75 M 28 AWG

747529016

SFP+ COPPER PATCH CABLE 10G - 14

747521258

SFP+ CU PATCH CABLE 10G 2.5M,30A

1002221252

*4 HD 4X STR TO * HD 4X RA 400MM

745463003

4X PCIE CABLE ASSY- 1.35M, CUSTO

1002210338

4X INT. HD STR SHORT 445MM 85 OH

745478001

26CKT SAS IPASS - 1M - ENGENIO

1002221250

*4 HD 4X STR TO * HD 4X RA 390MM

745462003

4X PCIE CABLE ASSY - 3M, CUSTOM

745460410

4X PCIE CABLE ASSEMBLY - 10M

1002221251

*4 HD 4X STR TO * HD 4X RA 510MM

1002210330

4XHD STR CABLE, 275MM

2002280104

4X ZHD STR TO STR, 1000MM, CTRL

739290025

SFP PATCH CABLE - 3 METER (PASSI

About Pluggable Cables

Pluggable Cable Assemblies includes pluggable equipment interconnects with interface and retention options.

When selecting an assembly, check connector family, protocol support, active or passive design and retention.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

Pluggable Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

High-speed equipment links

High-speed equipment links

Match the connector family, protocol and supported equipment port.

Rack interconnect routing

Rack interconnect routing

Check cable length, retention and active or passive design against the port requirements.

Storage interface cabling

Storage interface cabling

Confirm the exact interface and equipment compatibility before replacement.

Port retention checks

Port retention checks

Check latch access and connector orientation as well as electrical compatibility.

Shielded pluggable cables vs. Unshielded pluggable cables

Compare the interfaces, construction and selection details of these two product options.

Shielded pluggable cables

Representative listed part: 1110251208.

  • Cable Connectors CXP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Shielded
  • Features Pull Tab
  • Frequency - Max 120Gbps

Unshielded pluggable cables

Representative listed part: 2015911010.

  • Cable Connectors QSFP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Unshielded
  • Features Pull Tab
  • Frequency - Max 56Gbps

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

How do I match a pluggable cable to an equipment port?

Check Cable Connectors, Connector Type and Gender at both ends, together with the equipment-supported interface. Similar module housings do not establish compatible electrical or signalling requirements.

Use the Features attribute and the equipment compatibility information for the exact part. Confirm the supported link and length; do not assume an active and passive assembly are direct substitutes.

Review Fastening Type, pull-tab clearance and Cable Type before specifying the installation. Provide the port spacing and routing constraints if the connector body or release mechanism has limited access.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

1110251208 is shown as shielded pluggable cables, with Shielding listed as Shielded. 2015911010 is shown as unshielded pluggable cables, with Shielding listed as Unshielded. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare connector family, protocol support, active or passive design and retention. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required connector family, protocol support, active or passive design and retention. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details