icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
PSF1PXD5MWH

SFP+ 10GIG DIRECT ATTACH PASSIVE

PSF2PXA2MGR

SFP28 25GIG DIRECT ATTACH PASSIV

PSF2PXA2MBU

SFP28 25GIG DIRECT ATTACH PASSIV

PSF2PXC3.5MRD

SFP28 25GIG DIRECT ATTACH PASSIV

PSF2PXC4MBU

SFP28 25GIG DIRECT ATTACH PASSIV

PSF2PXC4MRD

SFP28 25GIG DIRECT ATTACH PASSIV

PSF2PXC4MBL

SFP28 25GIG DIRECT ATTACH PASSIV

PSF2PXC4MWH

SFP28 25GIG DIRECT ATTACH PASSIV

PSF1PXA3.5MBU

SFP+ 10GIG DIRECT ATTACH PASSIVE

PSF1PXD4MWH

SFP+ 10GIG DIRECT ATTACH PASSIVE

PSF2PXA2.5MGR

SFP28 25GIG DIRECT ATTACH PASSIV

PSF1PXA1.5MBUNL

SFP+ 10GIG DIRECT ATTACH PASSIVE

PHQ4SFPXA2MBL

QSFP+ TO SFP+ HYDRA COPPER CABLE

PSF1PXA3MBL

CABLE ASSY SFP+ M-M 3M

PSF2PXA3MBU

SFP28 25GIG DIRECT ATTACH PASSIV

PSF2PXA1MRD

SFP28 25GIG DIRECT ATTACH PASSIV

PSF2PXA2.5MWH

SFP28 25GIG DIRECT ATTACH PASSIV

PSF1PXA2MWH

CABLE ASSY SFP+ M-M 2M

PSF1PXA2MRD

CABLE ASSY SFP+ M-M 2M

PSF1PXA3.5MGR

SFP+ 10GIG DIRECT ATTACH PASSIVE

PSF1PXD5MRD

SFP+ 10GIG DIRECT ATTACH PASSIVE

PSF2PXA2MWH

SFP28 25GIG DIRECT ATTACH PASSIV

PSF2PXA3MRD

SFP28 25GIG DIRECT ATTACH PASSIV

760-10010-00015

CABLE SATA F-F 150MM

About Pluggable Cables

Pluggable Cable Assemblies includes pluggable equipment interconnects with interface and retention options.

When selecting an assembly, check connector family, protocol support, active or passive design and retention.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

Pluggable Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

High-speed equipment links

High-speed equipment links

Match the connector family, protocol and supported equipment port.

Rack interconnect routing

Rack interconnect routing

Check cable length, retention and active or passive design against the port requirements.

Storage interface cabling

Storage interface cabling

Confirm the exact interface and equipment compatibility before replacement.

Port retention checks

Port retention checks

Check latch access and connector orientation as well as electrical compatibility.

Shielded pluggable cables vs. Unshielded pluggable cables

Compare the interfaces, construction and selection details of these two product options.

Shielded pluggable cables

Representative listed part: 1110251208.

  • Cable Connectors CXP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Shielded
  • Features Pull Tab
  • Frequency - Max 120Gbps

Unshielded pluggable cables

Representative listed part: 2015911010.

  • Cable Connectors QSFP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Unshielded
  • Features Pull Tab
  • Frequency - Max 56Gbps

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

How do I match a pluggable cable to an equipment port?

Check Cable Connectors, Connector Type and Gender at both ends, together with the equipment-supported interface. Similar module housings do not establish compatible electrical or signalling requirements.

Use the Features attribute and the equipment compatibility information for the exact part. Confirm the supported link and length; do not assume an active and passive assembly are direct substitutes.

Review Fastening Type, pull-tab clearance and Cable Type before specifying the installation. Provide the port spacing and routing constraints if the connector body or release mechanism has limited access.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

1110251208 is shown as shielded pluggable cables, with Shielding listed as Shielded. 2015911010 is shown as unshielded pluggable cables, with Shielding listed as Unshielded. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare connector family, protocol support, active or passive design and retention. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required connector family, protocol support, active or passive design and retention. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details