icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
AFBR-83PD50Z

12X10.3G CXP AOC 50M PLEN FIBERR

PQSFPXA2MBLN

ASSY COPPER CABLE

1001890100

4X INT HD SHORT BODY STRAIGHT .1

1001710101

4X INT HD RAD SHORT 0.300M CTRL-

2049621251

SFP-DD 56G CBL ASSY 2.5M 30AWG

2033661005

QSFP-DD-2ZQ 0.5M 30AWG CABLE ASY

2033663025

QSFP-DD-2ZQ 2.5M 28AWG CABLE ASY

2050581004

8X STR NPIO TO 8X STR NPIO 2PC L

2049622251

SFP-DD 56G CBL ASSY 2.5M 28AWG

1110771005

IPASS X8 HD TO HD, 5.0M

AFBR-83ED01Z

10X10.3G CXP AOC 1M PLENUM FIBER

1110771003

IPASS X8 HD TO HD, 3.0M

2113011166

2X SLIMSAS 8X STR TO 2X LP STR85

1110751019

IPASS X4 HD TO HD 2.0M OUTDOOR

1110751000

IPASS X4 HD TO HD, 0.5M

AFBR-83PD30Z

12X10.3G CXP AOC 30M PLEN FIBER

10137656-2090LF

0.9M 30AWG INTERNAL MINI

1110771001

IPASS X8 HD TO HD, 1.0M

2024620011

FCT DITTO-PL SG/END HARNESS 5 CK

674898002

SIGNAL CBL CONN SATA RCPT

AFBR-83PD1Z

120G IB QDR CX

2024620010

DITTO-PL SG/END HARNESS 4 CKT 15

747579851

QSFP TO 2QSFP 30AWG 1.0M BO CABL

AFBR-83CD20Z-JU1

12X12.5G CXP AOC 20M PLEN FIBER

About Pluggable Cables

Pluggable Cable Assemblies includes pluggable equipment interconnects with interface and retention options.

When selecting an assembly, check connector family, protocol support, active or passive design and retention.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

Pluggable Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

High-speed equipment links

High-speed equipment links

Match the connector family, protocol and supported equipment port.

Rack interconnect routing

Rack interconnect routing

Check cable length, retention and active or passive design against the port requirements.

Storage interface cabling

Storage interface cabling

Confirm the exact interface and equipment compatibility before replacement.

Port retention checks

Port retention checks

Check latch access and connector orientation as well as electrical compatibility.

Shielded pluggable cables vs. Unshielded pluggable cables

Compare the interfaces, construction and selection details of these two product options.

Shielded pluggable cables

Representative listed part: 1110251208.

  • Cable Connectors CXP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Shielded
  • Features Pull Tab
  • Frequency - Max 120Gbps

Unshielded pluggable cables

Representative listed part: 2015911010.

  • Cable Connectors QSFP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Unshielded
  • Features Pull Tab
  • Frequency - Max 56Gbps

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

How do I match a pluggable cable to an equipment port?

Check Cable Connectors, Connector Type and Gender at both ends, together with the equipment-supported interface. Similar module housings do not establish compatible electrical or signalling requirements.

Use the Features attribute and the equipment compatibility information for the exact part. Confirm the supported link and length; do not assume an active and passive assembly are direct substitutes.

Review Fastening Type, pull-tab clearance and Cable Type before specifying the installation. Provide the port spacing and routing constraints if the connector body or release mechanism has limited access.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

1110251208 is shown as shielded pluggable cables, with Shielding listed as Shielded. 2015911010 is shown as unshielded pluggable cables, with Shielding listed as Unshielded. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare connector family, protocol support, active or passive design and retention. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required connector family, protocol support, active or passive design and retention. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details