icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
2150711003

MCIO 8X STR TO SLIMSAS 4X STR AN

2060371000

NPIO 8X RA TO STR, 300MM

1110751214

4X MINISAS HD TO SFP+ 0.5M 28AWG

1064152230

IPASS+ HD, MINI SAS, AOC, 30M

1001531044

4X NPIO RA TO 1X SATA, 420MM, 76

747520281

SFP+ TO SFP+ 10G 1.0 M 28 AWG

1003469054

ZQSFP+TO2XZQSFP+1.5M30AWG Y-CABL

2002271152

NPIO 8X RA, LOOPBACK, 300MM

745731300

36CT RAD-STR,324MM 36CT IPASS ST

747529568

SFP+ CU PATCH CBL 10G - 2M 30AWG

747529721

SFP+ CU CBL ASSY 10G 5M 24AWG NE

2033662103

DDQ TO 2ZQ 25G 1.5M 32AWG CBL AS

1001890310

4X INTERNAL HD SHORT, 312MM

1002221253

*4 HD 4X STR TO * HD 4X RA 520MM

2033662104

DDQ TO 2ZQ 25G 2M 32AWG CBL ASSY

1110751210

4X MINISAS HD TO SFP+ 3.0M 28AWG

745470111

X4 SAS CABLE ASSY - 4M, 26AWG, K

1000839008

QSFP TO HD 12G PASS CBL 1M 26AWG

2015912001

DDQ TO DDQ 25G 0.5M 32AWG CBL AS

2168331103

MCIO 8X RAD PT TO SLIMSAS 8X RAD

2046721001

MINISAS 4X HD RAD SAS4,0.3M

1110751022

IPASS X4 HD TO HD, 2.0M W/BLOCKI

747529094

CUSTOM VRSN OF CISCO NUOVA 74752

745460409

4X PCIE CABLE ASSEMBLY - 9M

About Pluggable Cables

Pluggable Cable Assemblies includes pluggable equipment interconnects with interface and retention options.

When selecting an assembly, check connector family, protocol support, active or passive design and retention.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

Pluggable Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

High-speed equipment links

High-speed equipment links

Match the connector family, protocol and supported equipment port.

Rack interconnect routing

Rack interconnect routing

Check cable length, retention and active or passive design against the port requirements.

Storage interface cabling

Storage interface cabling

Confirm the exact interface and equipment compatibility before replacement.

Port retention checks

Port retention checks

Check latch access and connector orientation as well as electrical compatibility.

Shielded pluggable cables vs. Unshielded pluggable cables

Compare the interfaces, construction and selection details of these two product options.

Shielded pluggable cables

Representative listed part: 1110251208.

  • Cable Connectors CXP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Shielded
  • Features Pull Tab
  • Frequency - Max 120Gbps

Unshielded pluggable cables

Representative listed part: 2015911010.

  • Cable Connectors QSFP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Unshielded
  • Features Pull Tab
  • Frequency - Max 56Gbps

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

How do I match a pluggable cable to an equipment port?

Check Cable Connectors, Connector Type and Gender at both ends, together with the equipment-supported interface. Similar module housings do not establish compatible electrical or signalling requirements.

Use the Features attribute and the equipment compatibility information for the exact part. Confirm the supported link and length; do not assume an active and passive assembly are direct substitutes.

Review Fastening Type, pull-tab clearance and Cable Type before specifying the installation. Provide the port spacing and routing constraints if the connector body or release mechanism has limited access.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

1110251208 is shown as shielded pluggable cables, with Shielding listed as Shielded. 2015911010 is shown as unshielded pluggable cables, with Shielding listed as Unshielded. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare connector family, protocol support, active or passive design and retention. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required connector family, protocol support, active or passive design and retention. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details