Board interfaces
Rectangular Connector Accessories can be evaluated for board interfaces. Match contact pitch, position count, mating direction, keying and mounting to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 643030-2 | CONN STRAIN RELIEF ENCLOSE 5POS |
| FI-RE41CL-SH2-3000 | CONN COVER SHELL FOR FI-RE41CL |
| FI-RE51CL-SH2-3000 | CONN COVER SHELL FOR FI-RE51CL |
| 1-964575-8 | PCB RAHMEN 8P |
| 1-1969608-2 | 12P VAL-U-LOK TPA 22-18 AWG |
| 1-640415-0 | CONN KEYING PLUG 94V-0 UNI-MATE |
| 1969609-6 | 6P VAL-U-LOK TPA 26-22 AWG |
| 2095001032 | FIXING RAIL 162.46MM LONG |
| 1722641007 | ULTRAFIT TPA V0 BLK 07 CKT |
| 1600916220 | MXP120 BACKSHELL 6 CIRC |
| 6-1971794-1 | NEW GI CONN2.5 TPA 6P BLACK |
| 1587826-2 | CABLE SEAL, SIZE B, HVA280-2PI |
| 1011-346-0405 | DUST CAP FOR DT4PIN PLUG |
| 643191201 | CMC WR CAP 32CKT MAT SEAL |
| AT11-310-0205 | MOUNTING CLIP, AT, ATM, ATP,ATHD |
| N3505-3B | EJECTOR LATCHES BLK LONG W/PINS |
| 1722641002 | ULTRAFIT TPA V0 BLK 02 CKT |
| 194270021 | GASKET 6CIR FOR PLUG HOUSING |
| 2329542-4 | PERIMETER SEAL, 4P |
| 1969825-5 | EP 2.5 TPA RETAINER, 5 POS |
| 2047230010 | BACKSHELL MINIFIT 10CKT 1=1PC |
| 2095001029 | FIXING RAIL 147.22MM LONG |
| 643067-3 | CONN STRAIN RELIEF COVER 3POS |
| 3490-89124 | PULL TAB 24-36POSITION 891SERIES |
The Rectangular Connector Accessories range covers rectangular connector systems for wire, board or panel interconnections.
Compare contact pitch, position count, mating direction, keying and mounting for the required installation. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.
Review Accessory Type, Number of Positions, For Use With/Related Products and Features on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Rectangular Connector Accessories can be evaluated for board interfaces. Match contact pitch, position count, mating direction, keying and mounting to the equipment interface.
For harness integration, verify Accessory Type, Number of Positions, For Use With/Related Products and Features on the selected Rectangular Connector Accessories. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.
In panel assemblies, allow for the required mounting, routing or termination space. Check contact pitch, position count, mating direction, keying and mounting before assembly.
For rectangular connector accessories inspection, identify the original Rectangular Connector Accessories part number and mating arrangement. Compare Accessory Type, Number of Positions, For Use With/Related Products and Features before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 1722642005
Example: 1722643007
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers rectangular connector systems for wire, board or panel interconnections. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.
Examples in this category include Terminal Position Assurance (TPA), Retention Key and Backshell. Match the selected Rectangular Connector Accessories to the required contact pitch, position count, mating direction, keying and mounting.
For Rectangular Connector Accessories, check Accessory Type, Number of Positions, For Use With/Related Products and Features against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check contact pitch, position count, mating direction, keying and mounting for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory. For Rectangular Connector Accessories, identify the matching system and required assembly parts before ordering.
1722642005 specifies Accessory Type: Terminal Position Assurance (TPA) and Number of Positions: 5. 1722643007 specifies Accessory Type: Terminal Position Assurance (TPA) and Number of Positions: 7. Check the full mating and installation requirements before treating different Rectangular Connector Accessories as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include contact pitch, position count, mating direction, keying and mounting and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details