Board interfaces
Rectangular Connector Accessories can be evaluated for board interfaces. Match contact pitch, position count, mating direction, keying and mounting to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 1703997-1 | COVER,90,DEGREE |
| 102991-1 | BOARD MNT HEADER SHELL 6POS |
| 1969608-6 | 6P VAL-U-LOK TPA 22-18 AWG |
| 350022-2 | COMMONING BAR 4CIRC GOLD |
| 353659-6 | LIF 81P FRAME ASSY |
| 2098436-4 | CONN BACKSHELL 3POS |
| 2103157-1 | SHIELD, PLUG, SIZE 1, SN, HVA280 |
| 2035047-3 | CONN BACKSHELL 4POS PLASTIC |
| 640550-9 | CONN DUST COVER 9POS CLOSED |
| 643075-5 | CONN STRAIN RELIEF COVER 5POS |
| 643077-5 | CONN STRAIN RELIEF COVER 5POS |
| 2177090-1 | STEEL,OUTER FERRULE,8MM HV,50SQM |
| 499991-2 | CONN POLARIZER SNAP-IN |
| 111735-1 | R/A PULL TAB SNAP IN FLEXIBLE |
| 1379209-1 | 26W COVER ASSEMBLY |
| 1924487-3 | AMPSEAL 16 MOUNTING CLIP, STRAIG |
| 368121-1 | CLIP HSG FOR 070(EJ MK-II 16P) |
| 640713-2 | CONN STRAIN RELIEF 2POS IN LINE |
| 368051-1 | E-J MK-II(+) 16P CAP DBL |
| 2040594-3 | SEAL CAP HSG 4P, AMPSEAL16 SEA |
| 2302481-3 | CONN BACKSHELL 2POS |
| 347681-1 | 0.35MM CABLE SEAL LC SILIC |
| 480634-1 | CONN MR STRAIN RELIEF 20POS |
| 2302495-2 | CONN BACKSHELL 12POS |
The Rectangular Connector Accessories range covers rectangular connector systems for wire, board or panel interconnections.
Compare contact pitch, position count, mating direction, keying and mounting for the required installation. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.
Review Accessory Type, Number of Positions, For Use With/Related Products and Features on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Rectangular Connector Accessories can be evaluated for board interfaces. Match contact pitch, position count, mating direction, keying and mounting to the equipment interface.
For harness integration, verify Accessory Type, Number of Positions, For Use With/Related Products and Features on the selected Rectangular Connector Accessories. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.
In panel assemblies, allow for the required mounting, routing or termination space. Check contact pitch, position count, mating direction, keying and mounting before assembly.
For rectangular connector accessories inspection, identify the original Rectangular Connector Accessories part number and mating arrangement. Compare Accessory Type, Number of Positions, For Use With/Related Products and Features before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 1722642005
Example: 1722643007
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers rectangular connector systems for wire, board or panel interconnections. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.
Examples in this category include Terminal Position Assurance (TPA), Retention Key and Backshell. Match the selected Rectangular Connector Accessories to the required contact pitch, position count, mating direction, keying and mounting.
For Rectangular Connector Accessories, check Accessory Type, Number of Positions, For Use With/Related Products and Features against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check contact pitch, position count, mating direction, keying and mounting for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory. For Rectangular Connector Accessories, identify the matching system and required assembly parts before ordering.
1722642005 specifies Accessory Type: Terminal Position Assurance (TPA) and Number of Positions: 5. 1722643007 specifies Accessory Type: Terminal Position Assurance (TPA) and Number of Positions: 7. Check the full mating and installation requirements before treating different Rectangular Connector Accessories as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include contact pitch, position count, mating direction, keying and mounting and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details