Board interfaces
Rectangular Connector Contacts can be evaluated for board interfaces. Match contact pitch, position count, mating direction, keying and mounting to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 40-13-0853 | MINIFIT TERM CRP MALE BS AU |
| 39-00-0376 | MINIKK CRIMP REC |
| 39-00-0327 | 39-00-0327 |
| 56134-9002 | 2.0 WTB CONN CRIMP REC AWG 26- 2 |
| 202936-1000 | MCAT MIDPOWER FEMALE 20-24AWG 0 |
| 725411-2MA-CP | LOOSE TERMINAL FOR RMH CONNECTOR |
| 30490-9802 | MINIFIT JR GRND PIN C 30SAU 1824 |
| 2085265305 | CTX64-L 7MM,2-POL,D-WIND, HP AG |
| 50-29-1744 | KK 100 CRP TERM SHROUDED 24-30 A |
| 720374-2MA-CP | LOOSE TERMINAL FOR SJA & SJH CON |
| 33011-1004 | MX150 BLD TERM GOLD 16-20AWG B W |
| 206460-0041 | MICRO-FIT PLUS FEMCRPTER 16AWG T |
| 34080-0102 | MX150 BLD CS TERM GOLD 14/16AWG |
| 08-70-1030 | SPOX TERMINAL LOOSE 51 |
| 39-00-0168 | MINIFIT TERM CRP FEM LSE BS AU 1 |
| 503095-1200 | IGRID 20W/B RECCRIMPTERM GOLD PL |
| 64322-1339 | CP TERM 0.6 HP AU 1 27 - 0 75SQM |
| 720462-2MA-CP | LOOSE TERMINAL FOR SNR CONNECTOR |
| 08-65-0816 | KK 100 CRP TERM STD 22-30 AWG SG |
| 08-70-0043 | .062 LOOSE FORM TERMINAL 5006TL |
| 499468001 | 499468001 |
| 08-70-1028 | CUT LOOSE TERMINAL |
| 206460-0031 | MICRO-FIT PLUS FEMCRPTER 18AWG T |
| 700580085 | SL FEM CRIMP TERM 32-36 REEL 30A |
The Rectangular Connector Contacts range covers rectangular connector systems for wire, board or panel interconnections.
Compare contact pitch, position count, mating direction, keying and mounting for the required installation. These are separate conductive contacts. Match the contact to its housing, wire range and specified termination tooling.
Review Pin or Socket, Contact Termination, Wire Gauge, Contact Finish and Contact Finish Thickness on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Rectangular Connector Contacts can be evaluated for board interfaces. Match contact pitch, position count, mating direction, keying and mounting to the equipment interface.
For harness integration, verify Pin or Socket, Contact Termination, Wire Gauge, Contact Finish and Contact Finish Thickness on the selected Rectangular Connector Contacts. These are separate conductive contacts. Match the contact to its housing, wire range and specified termination tooling.
In panel assemblies, allow for the required mounting, routing or termination space. Check contact pitch, position count, mating direction, keying and mounting before assembly.
For rectangular connector contacts inspection, identify the original Rectangular Connector Contacts part number and mating arrangement. Compare Pin or Socket, Contact Termination, Wire Gauge, Contact Finish and Contact Finish Thickness before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 48116-000LF
Example: 8700002
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers rectangular connector systems for wire, board or panel interconnections. These are separate conductive contacts. Match the contact to its housing, wire range and specified termination tooling.
Examples in this category include 22-26 AWG, 18-24 AWG and 16 AWG. Match the selected Rectangular Connector Contacts to the required contact pitch, position count, mating direction, keying and mounting.
For Rectangular Connector Contacts, check Pin or Socket, Contact Termination, Wire Gauge, Contact Finish and Contact Finish Thickness against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check contact pitch, position count, mating direction, keying and mounting for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
These are separate conductive contacts. Match the contact to its housing, wire range and specified termination tooling. For Rectangular Connector Contacts, identify the matching system and required assembly parts before ordering.
48116-000LF specifies Pin or Socket: Pin and Contact Termination: Crimp. 8700002 specifies Pin or Socket: Pin and Contact Termination: Crimp. Check the full mating and installation requirements before treating different Rectangular Connector Contacts as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include contact pitch, position count, mating direction, keying and mounting and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details