Board interfaces
Rectangular Connector Contacts can be evaluated for board interfaces. Match contact pitch, position count, mating direction, keying and mounting to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 6-964282-6 | TERM JUNIOR POWER TIMER TYPE A |
| 827547-1 | TERMINAL SPRING |
| 965932-2 | TERM FLACHSTECKER 1.6X0.6 |
| 964303-1 | TERM TAB A 5.8X0.8 CONT CF SN LP |
| 6-144617-1 | TERM STD PW TIMER W/BARRIER |
| 964332-5 | TERM STD PW TIMER CONTACT TYPE A |
| 968053-1 | TERM MT3 REC 1.6 CONT SRC SN LP |
| 927848-2 | TERM STD TIMER CONTACT LP |
| 6-928966-7 | TERM STD PW TIMER CONTACT |
| 6-962916-7 | TERM FLACHSTECKER 2.8X0.8 |
| 962935-1 | TERM MPT REC 9.5 CONT SWS SN LP |
| 926985-2 | TERM STC REC 6.3 CONTACT SRC SN |
| 969029-5 | TERM TAB A 1.6X0.6 CONT CS AG |
| 2-963861-1 | TERM TAB 2.8X0.8 CONT CF SWS SN |
| 927865-4 | TERM STC REC 6.3 CONTACT SRC |
| 50837-8100 | 2.5 W/W CRIMP TERM |
| 6-964302-6 | TERM TAB A 2.8X0.8 CONTACT SWS |
| 963823-1 | TERM TAB 4.8X0.8 CONT CS SN LP |
| 964281-1 | TERM JUN-POW-TIM CONTACT |
| 1703279-5 | TERM TAB A 1.6X0.6 CONT CS AG |
| 962937-1 | TERM MPT REC 9.5 CONT SWS SN LP |
| 963770-1 | TERM TAB 9.5X1.2 CONT CS SWS SN |
| 6-962928-6 | TERM MAXI-POWER-TIM KONT |
| 1-964293-3 | TERM TAB A 2.8X0.8 CONT CS AU |
The Rectangular Connector Contacts range covers rectangular connector systems for wire, board or panel interconnections.
Compare contact pitch, position count, mating direction, keying and mounting for the required installation. These are separate conductive contacts. Match the contact to its housing, wire range and specified termination tooling.
Review Pin or Socket, Contact Termination, Wire Gauge, Contact Finish and Contact Finish Thickness on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Rectangular Connector Contacts can be evaluated for board interfaces. Match contact pitch, position count, mating direction, keying and mounting to the equipment interface.
For harness integration, verify Pin or Socket, Contact Termination, Wire Gauge, Contact Finish and Contact Finish Thickness on the selected Rectangular Connector Contacts. These are separate conductive contacts. Match the contact to its housing, wire range and specified termination tooling.
In panel assemblies, allow for the required mounting, routing or termination space. Check contact pitch, position count, mating direction, keying and mounting before assembly.
For rectangular connector contacts inspection, identify the original Rectangular Connector Contacts part number and mating arrangement. Compare Pin or Socket, Contact Termination, Wire Gauge, Contact Finish and Contact Finish Thickness before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 48116-000LF
Example: 8700002
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers rectangular connector systems for wire, board or panel interconnections. These are separate conductive contacts. Match the contact to its housing, wire range and specified termination tooling.
Examples in this category include 22-26 AWG, 18-24 AWG and 16 AWG. Match the selected Rectangular Connector Contacts to the required contact pitch, position count, mating direction, keying and mounting.
For Rectangular Connector Contacts, check Pin or Socket, Contact Termination, Wire Gauge, Contact Finish and Contact Finish Thickness against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check contact pitch, position count, mating direction, keying and mounting for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
These are separate conductive contacts. Match the contact to its housing, wire range and specified termination tooling. For Rectangular Connector Contacts, identify the matching system and required assembly parts before ordering.
48116-000LF specifies Pin or Socket: Pin and Contact Termination: Crimp. 8700002 specifies Pin or Socket: Pin and Contact Termination: Crimp. Check the full mating and installation requirements before treating different Rectangular Connector Contacts as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include contact pitch, position count, mating direction, keying and mounting and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details