LED module interconnects
Match the mating lighting connector, polarity and circuit count.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 9-2834001-1 | 2P FEMALE CABLE ASSEMBLY |
| 9-2834005-1 | 4P FEMALE CABLE ASSEMBLY-150MM |
| 2106378-1 | SSL PLUG CABLE ASSEMBLY |
| 2181148-1 | CABLE SPT-2 PLUG TO PIGTAIL |
| 2058943-6 | CABLE ASSY, MINI CT 2 POS., 24 I |
| 2-2083031-8 | CABLEASSEMBLY MINI HVL FEMALE TO |
| 2181192-4 | CABLE SPT-2 PLUG TO OUTLET |
| 2181148-2 | C/A, NECTOR, HV-2, PLUG-PIGTAI |
| 2058300-2 | CABLE ASSY 4POS WIRE TO BRD |
| 9-2834003-1 | 3P FEMALE CABLE ASSEMBLY |
| 2-2083030-6 | CBL ASSY MINI HVL FEMALE TO MALE |
| 2058943-4 | CABLE ASSY MINI CT 5POS |
| 2181143-4 | CABLE SPT-2 PLUG TO OUTLET |
| 2058300-1 | CABLE ASSY 2POS WIRE TO BRD |
| 2-2083073-1 | CABLE SVT PLUG TO OUTLET 2FT |
| 2-2083073-3 | CABLE ASSY NECTOR S PLUG TO OUTL |
| 2-2083041-2 | CBL ASSY MINI HVL 7WAY DIS TO PI |
| 2154173-1 | CABLE STL-FTL-FTL-TERMINTR 650MM |
| 2-2083135-3 | CABLE ASSY NECTORS FEMALE/FEMALE |
| 2-2083032-4 | CABLEASSEMBLY MINI HVL FEMALE TO |
| 1-2083030-8 | CABLE ASSEMBLY MINI HVL FEMALE T |
| 2181195-1 | CABLE SPT-2 PLUG TO PIGTAIL |
| 2181197-1 | CABLE SPT-2 OUTLET TO PIGTAIL |
| 2-2083135-2 | CABLE ASSY NECTORS FEMALE/FEMALE |
Solid-State Lighting Cables includes connector leads and interconnects for compatible lighting modules.
When selecting an assembly, check mating lighting connector, polarity, circuit count, current and installation conditions.
A lighting cable is not automatically a dimming, outdoor or waterproof cable. Those functions and ratings must be established for the selected assembly.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Match the mating lighting connector, polarity and circuit count.
Check load current and the selected connector and cable ratings.
Confirm the intended module interface and installation conditions.
Match the original wiring and connector references; outdoor or dimming capability must be specified separately.
Compare the interfaces, construction and selection details of these two product options.
Representative listed part: ZFS-CH140-8I.
Representative listed part: 1-2058943-0.
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
Compare the full 1st Connector and 2nd Connector entries, including plug or socket and position count. Match the lighting module connector reference and required wiring before selecting a cable.
Check the exact Features attribute and the lighting equipment documentation. Dimming is listed on selected parts; the category name does not establish the required dimming connection for every assembly.
Review the exact listed protection features and mating arrangement, along with the equipment electrical requirements. Request confirmation where sealing, cable entry or installation conditions are not specified.
A lighting cable is not automatically a dimming, outdoor or waterproof cable. Those functions and ratings must be established for the selected assembly.
ZFS-CH140-8I is shown as two-position lighting plugs, with 1st Connector listed as Plug, 2 Position. 1-2058943-0 is shown as two-position lighting sockets, with 1st Connector listed as Socket, 2 Position. These are two examples, not a statement that every part has either specification.
Provide the original manufacturer and complete part number, or a drawing. For this range, compare mating lighting connector, polarity, circuit count, current and installation conditions. Identify any requirement not covered by the listing rather than selecting only by length or appearance.
Supply a mating-interface drawing and the required mating lighting connector, polarity, circuit count, current and installation conditions. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details