icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
SSL11-J4L2J-T22D06

SSL1.1 FLAT CABLE W2W LOCKX2

SSL11-J4LJ0-W22A04

SSL1.1 WIRE ASSY WITH W2W LOCK

SSL11-P4LJP-022D06

SSL1.1 FLAT CABLE W/O LOCK

2181194-2

C/A, NECTOR, HV-4, PLUG-PIGTAI

SSL11-P6LP0-B22A02

SSL1.1WIRE ASSY WITH W2B LOCK

SSL11-J4L2J-022D06

SSL1.1 FLAT CABLE W/O LOCK

SSL11-J6LJ0-B22A04

SSL1.1WIRE ASSY WITH W2B LOCK

2181198-2

C/A, NECTOR, LV-2, OUTLET TO P

SSL12-P2LP0-M20F01

CABLE 2POS PLUG 1M

SSL12-J2LJ0-020F01

CABLE 2POS JACK 1M

SSL11-J4LJ0-B22A06

SSL1.1 WIRE ASSY WITH W2B LOCK

SSL12-J2LJ0-020H01

CABLE 2POS JACK 1M

SSL11-J6LJ0-B22A02

SSL1.1WIRE ASSY WITH W2B LOCK

SSL11-P4LP0-B22A02

SSL1.1WIRE ASSY WITH W2B LOCK

1-2083073-2

CABLE ASSY NECTOR S PLUG TO OUTL

1826114

CONN PLUG 4POS 1.8MM

1-2083078-1

CABLE ASSY NECTOR S EUROPLUG TO

2154175-4

CABLE ST LEFT-R/A DOWN GRN 300MM

1-2083073-3

CABLE ASSY NECTOR S PLUG TO OUTL

1-2083136-2

CABLE 4POS FEMALE/MALE

769008222

769008222

1-2083074-1

CABLE SVT PLUG TO PIGTAIL 2FT

TCOR-CL-8MM-60

CBL ASSY SSL BLK/RED 60"

1-2083076-1

CABLE SVT OUTLET TO PIGTAIL 2FT

About Solid State Lighting Cables

Solid-State Lighting Cables includes connector leads and interconnects for compatible lighting modules.

When selecting an assembly, check mating lighting connector, polarity, circuit count, current and installation conditions.

A lighting cable is not automatically a dimming, outdoor or waterproof cable. Those functions and ratings must be established for the selected assembly.

Solid State Lighting Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

LED module interconnects

LED module interconnects

Match the mating lighting connector, polarity and circuit count.

Fixture internal wiring

Fixture internal wiring

Check load current and the selected connector and cable ratings.

Modular light-bar links

Modular light-bar links

Confirm the intended module interface and installation conditions.

Lighting harness servicing

Lighting harness servicing

Match the original wiring and connector references; outdoor or dimming capability must be specified separately.

Two-position lighting plugs vs. Two-position lighting sockets

Compare the interfaces, construction and selection details of these two product options.

Two-position lighting plugs

Representative listed part: ZFS-CH140-8I.

  • 1st Connector Plug, 2 Position
  • 2nd Connector Wire Leads
  • Features Not specified for this example
  • Length 5.51" (140.0mm)

Two-position lighting sockets

Representative listed part: 1-2058943-0.

  • 1st Connector Socket, 2 Position
  • 2nd Connector Wire Leads
  • Features Not specified for this example
  • Length 39.4" (1.00m)

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

Which lighting cable connector arrangement should I choose?

Compare the full 1st Connector and 2nd Connector entries, including plug or socket and position count. Match the lighting module connector reference and required wiring before selecting a cable.

Check the exact Features attribute and the lighting equipment documentation. Dimming is listed on selected parts; the category name does not establish the required dimming connection for every assembly.

Review the exact listed protection features and mating arrangement, along with the equipment electrical requirements. Request confirmation where sealing, cable entry or installation conditions are not specified.

A lighting cable is not automatically a dimming, outdoor or waterproof cable. Those functions and ratings must be established for the selected assembly.

ZFS-CH140-8I is shown as two-position lighting plugs, with 1st Connector listed as Plug, 2 Position. 1-2058943-0 is shown as two-position lighting sockets, with 1st Connector listed as Socket, 2 Position. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare mating lighting connector, polarity, circuit count, current and installation conditions. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required mating lighting connector, polarity, circuit count, current and installation conditions. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details