LED module interconnects
Match the mating lighting connector, polarity and circuit count.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 1-2083135-5 | CABLE ASSY NECTORS FEMALE/FEMALE |
| 1-2083030-6 | CBL ASSY MINI HVL FEMALE TO MALE |
| 1-2083075-3 | CABLE ASSY NECTOR S FEMALE TO PI |
| 688014146 | PICO-EZMATE HARNESS FOR VERO 6" |
| 1-2083040-2 | CABLE SPT-7 PLUG TO PIGTAIL |
| 688014085 | PICO-EZMATE HARNESS FOR VERO 12" |
| 688014227 | PICO-EZMATE HARNESS FOR VERO 18" |
| 688014225 | PICO-EZMATE HARNESS FOR VERO 12" |
| 1-2083135-1 | CABLE 4POS FEMALE/FEMALE |
| 2181195-4 | CABLE SPT-2 PLUG TO PIGTAIL |
| 1-2083136-1 | CABLE 4 POS FEMALE/MALE |
| 2106378-4 | CONN PLUG CABLE ASSY 4POS 18AWG |
| 2154175-6 | CABLE ST LEFT-R/A DOWN BLU 300MM |
| 2154172-6 | CABLE ASSY STL-STR BLUE 300MM |
| 2154172-3 | CABLE ASSY STL-STR RED 300MM |
| 2106391-5 | CBL ASSEM., 2 POS SLIMSEAL RECPT |
| 2181143-3 | C/A, NECTOR, HV-3, PLUG TO OUT |
| 688015642 | POWER CABLE 7P |
| 2181148-3 | C/A, NECTOR, HV-2, PLUG-PIGTAI |
| 2058300-6 | CABLE ASSEMBLY, 2 POS WIRE TO BR |
| 14430203 | CONN PIGTAIL TYPE II 2POS 13.8" |
| 2-2332966-4 | ROTATABLE TOOL-LESS RECEPTACLE A |
| 2-2083135-4 | CABLE ASSY NECTORS FEMALE/FEMALE |
| 2-2083041-1 | CBL ASSY MINI HVL 7WAY DIS TO PI |
Solid-State Lighting Cables includes connector leads and interconnects for compatible lighting modules.
When selecting an assembly, check mating lighting connector, polarity, circuit count, current and installation conditions.
A lighting cable is not automatically a dimming, outdoor or waterproof cable. Those functions and ratings must be established for the selected assembly.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Match the mating lighting connector, polarity and circuit count.
Check load current and the selected connector and cable ratings.
Confirm the intended module interface and installation conditions.
Match the original wiring and connector references; outdoor or dimming capability must be specified separately.
Compare the interfaces, construction and selection details of these two product options.
Representative listed part: ZFS-CH140-8I.
Representative listed part: 1-2058943-0.
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
Compare the full 1st Connector and 2nd Connector entries, including plug or socket and position count. Match the lighting module connector reference and required wiring before selecting a cable.
Check the exact Features attribute and the lighting equipment documentation. Dimming is listed on selected parts; the category name does not establish the required dimming connection for every assembly.
Review the exact listed protection features and mating arrangement, along with the equipment electrical requirements. Request confirmation where sealing, cable entry or installation conditions are not specified.
A lighting cable is not automatically a dimming, outdoor or waterproof cable. Those functions and ratings must be established for the selected assembly.
ZFS-CH140-8I is shown as two-position lighting plugs, with 1st Connector listed as Plug, 2 Position. 1-2058943-0 is shown as two-position lighting sockets, with 1st Connector listed as Socket, 2 Position. These are two examples, not a statement that every part has either specification.
Provide the original manufacturer and complete part number, or a drawing. For this range, compare mating lighting connector, polarity, circuit count, current and installation conditions. Identify any requirement not covered by the listing rather than selecting only by length or appearance.
Supply a mating-interface drawing and the required mating lighting connector, polarity, circuit count, current and installation conditions. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details