icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
2213223-1

PANEL MOUNT SEAL

299139-1

PANEL GASKET, 3 POS NECTOR M

2213351-1

SEAL/CABLE CLAMP ASSEMBLY, 14MM

293358-1

CONN TUBE FOR 7.5MM CONNECTOR

293587-1

CONN COVER FOR DISTRIBUTOR

1740315-1

CONN COVER FOR DISTRIBUTOR

293130-2

CONN LATCH FOR NECTOR PANEL MNT

1740261-2

CONN RING CLIP FOR TUBE

1740316-1

CONN CODING RING FOR DISTRIBUTOR

293275-1

RUBBER BOOT

293270-6

CONN BUS BAR FOR 7.5MM CONNECTOR

293300-3

CONN BUS BAR FOR 7.5MM CONNECTOR

293286-1

CONN WALL OUTLET FRAME

293286-3

CONN WALL OUTLET FRAME

1740315-2

CONN COVER FOR DISTRIBUTOR

1-2213396-1

NECTOR M CONTACT POSITIONER

1-293660-1

CONN RING NUT FOR PLUG/RCPT HSG

1-293660-2

PLASTIC NUT M-LINE 5,6,7 POLES

1-293607-2

CONN RING NUT FOR PLUG/RCPT HSG

2213229-1

RING NUT, NECTOR M, 5/6/7 POS, 1

293285-1

CONN WALL OUTLET ASSY

293286-2

CONN WALL OUTLET FRAME

293300-5

NECTOR S BUS BAR ASSY HV-4 TAB W

6.09175E+14

CONN CAP BLK 9175 SERIES CONTACT

About Solid State Lighting Connector Accessories

The Solid State Lighting Connector Accessories range covers connector systems for compatible solid-state lighting assemblies.

Compare position count, mating system, wire or board termination and electrical rating for the required installation. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.

Review Accessory Type, For Use With/Related Products, Specifications, Material and Color on the individual product page before choosing a part.

Solid State Lighting Connector Accessories

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Lighting modules

Lighting modules

Solid State Lighting Connector Accessories can be evaluated for lighting modules. Match position count, mating system, wire or board termination and electrical rating to the equipment interface.

Control wiring

Control wiring

For control wiring, verify Accessory Type, For Use With/Related Products, Specifications, Material and Color on the selected Solid State Lighting Connector Accessories. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.

Lighting prototypes

Lighting prototypes

In lighting prototypes, allow for the required mounting, routing or termination space. Check position count, mating system, wire or board termination and electrical rating before assembly.

Solid State Lighting Connector Accessories inspection

Solid State Lighting Connector Accessories inspection

For solid state lighting connector accessories inspection, identify the original Solid State Lighting Connector Accessories part number and mating arrangement. Compare Accessory Type, For Use With/Related Products, Specifications, Material and Color before substitution.

6.09159E+14 configuration vs. 6.09175E+14 configuration

Compare the interfaces, construction and selection details of these two product options.

6.09159E+14 configuration

Example: 6.09159E+14

  • Accessory Type Cover
  • For Use With/Related Products 9159 Series Plugs
  • Specifications 5 Positions
  • Material Polyamide (PA46), Nylon 4/6, Glass Filled
  • Color White

6.09175E+14 configuration

Example: 6.09175E+14

  • Accessory Type Cap (Cover)
  • For Use With/Related Products 9175 Series Contacts, IDC
  • Specifications 3 Positions, Wire Stop
  • Material Polyamide (PA46), Nylon 4/6
  • Color White

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Solid State Lighting Connector Accessories include?

This category covers connector systems for compatible solid-state lighting assemblies. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.

Examples in this category include Cover, Cap (Cover) and Bus Bar. Match the selected Solid State Lighting Connector Accessories to the required position count, mating system, wire or board termination and electrical rating.

For Solid State Lighting Connector Accessories, check Accessory Type, For Use With/Related Products, Specifications, Material and Color against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check position count, mating system, wire or board termination and electrical rating for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory. For Solid State Lighting Connector Accessories, identify the matching system and required assembly parts before ordering.

6.09159E+14 specifies Accessory Type: Cover and For Use With/Related Products: 9159 Series Plugs. 6.09175E+14 specifies Accessory Type: Cap (Cover) and For Use With/Related Products: 9175 Series Contacts, IDC. Check the full mating and installation requirements before treating different Solid State Lighting Connector Accessories as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include position count, mating system, wire or board termination and electrical rating and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details