Lighting modules
Solid State Lighting Connector Assemblies can be evaluated for lighting modules. Match position count, mating system, wire or board termination and electrical rating to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 1971742-1 | CONN SSL BLADE 1POS SOLDER |
| SM02B-LEASS-TF | CONN SSL HDR 2POS 1.8MM SOLDER |
| DF64-2S-4.5H(21) | CONN SSL RCPT 2POS 4.5MM SOLDER |
| DF64-2P-4.5C | CONN SSL RCPT HSG 2POS 4.5MM |
| 163 ST/ 3 DS | CONN TERM PLUG 3POS SCREW |
| 294-5175 | LIGHTING CONNECTOR; PUSH-BUTTON, |
| 294-4455 | LIGHTING CONNECTOR; PUSH-BUTTON, |
| FLM-S21-W0 | PLUG HOUSING, FLM SERIES, ZHAGA |
| 293650-1 | CONN SSL T-SPLITTER 2POS 3.7MM |
| SSL11-J6C00-000001 | SSL-1.1 DC 6P JACK CONN |
| LK 980-01/ 4 | CONN LUMINAIRE 4POLE |
| LK 980-01/ 5 BD 3 N PE 1 2 | CONN LUMINAIRE 5POLE W/PRNT |
| 930-00/ 2 | CONN TERM STRIP 2POLE SCREWLESS |
| SMDFLAT 545/ 2 | CONN LED 2POS W/ MOULDING SMT |
| AC 166 GEBU/ 3 SW | CONN RCPT 3POS CLAMP/SPR PNLMT |
| 1814870 | CONN HEADER 5POS 2.5MM TH |
| SMDFLAT 345/ 1 WS | CONN LED 1POS W/ MOULDING SMT |
| BJ301-02-Y-A | 2W, 4.00MM PITCH HEADER, SMT, HO |
| BJ302-01-A | WIRE TRAP PUSH IN, SMT,4.00MM PI |
| 2060-903 | BOARD-TO-BOARD LINK; PIN SPACING |
| ZFS-CH-10J | LED FLEX RIBBON JOINER CONNECTOR |
| 2363638-2 | LUMAWISE ENDURANCE S2 RECEPTACLE |
| H4SFC2DMS | CONN FMALE COUPLER PLUS 12AWG |
| 5034730290 | 3.7 LED CONN PLUG CRIMP HSG LH |
The Solid State Lighting Connector Assemblies range covers connector systems for compatible solid-state lighting assemblies.
Compare position count, mating system, wire or board termination and electrical rating for the required installation. Use the exact mating part and installation dimensions specified for the selected item.
Review Style, Connector Type, Number of Positions, Mounting Type and Termination on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Solid State Lighting Connector Assemblies can be evaluated for lighting modules. Match position count, mating system, wire or board termination and electrical rating to the equipment interface.
For control wiring, verify Style, Connector Type, Number of Positions, Mounting Type and Termination on the selected Solid State Lighting Connector Assemblies. Use the exact mating part and installation dimensions specified for the selected item.
In lighting prototypes, allow for the required mounting, routing or termination space. Check position count, mating system, wire or board termination and electrical rating before assembly.
For solid state lighting connector assemblies inspection, identify the original Solid State Lighting Connector Assemblies part number and mating arrangement. Compare Style, Connector Type, Number of Positions, Mounting Type and Termination before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 5034710200
Example: ABTB-400-02-SR1
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers connector systems for compatible solid-state lighting assemblies. Use the exact mating part and installation dimensions specified for the selected item.
Examples in this category include Receptacle, Blade and Receptacle, Hermaphroditic and Plug. Match the selected Solid State Lighting Connector Assemblies to the required position count, mating system, wire or board termination and electrical rating.
For Solid State Lighting Connector Assemblies, check Style, Connector Type, Number of Positions, Mounting Type and Termination against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check position count, mating system, wire or board termination and electrical rating for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
Use the exact mating part and installation dimensions specified for the selected item. For Solid State Lighting Connector Assemblies, identify the matching system and required assembly parts before ordering.
5034710200 specifies Style: Board to Board or Cable and Connector Type: Receptacle. ABTB-400-02-SR1 specifies Style: Board to Board and Connector Type: Blade and Receptacle, Hermaphroditic. Check the full mating and installation requirements before treating different Solid State Lighting Connector Assemblies as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include position count, mating system, wire or board termination and electrical rating and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details