icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
1378040050

PAC-GF30-UNIV-V0-5M

D-500-0457-1-612-078

CABLE IN LINE COUPLER 1WR 6.50'

6720000477

MS-C32B-C26M04-L8D-020

6720000483

MS-C2+B-C6+M04-L8D-020

D-500-0458-2-612-240

CABLE IN LINE COUPLER 1WIRE 20'

6720000461

MS-C2+B-C2+B-L8D-1.5

1337707-1

CABLE RING TERM-RING TERM 10"

AYG4V1A085M3

CABLE OPT CONN PLG-WIRE 1WIRE 1M

9457251533

CBL RJ45 PLG/PWR 8SIG/4PWR 4.92'

250200

CABLE PWR CONT-SCREW 13WR 8.20'

AYG4V10585M1

CABLE OPT CONN PLG-WIR 1WR 1.97"

554270

COMPLETE 7P 24V/N COIL/40 LU 4.5

10102458-N0500YYLF

SOFIX CABLE

250262

HARNESS L=2500 WITH SOCKET 13P/S

10124234-060007LF

CABLE BLADE PWR-BLADE 2WR 5.12"

D-500-0466-1-612-120

CABLE IN LINE COUPLER 1WIRE 10'

D-500-0456-1-612-120

CABLE IN LINE COUPLER 2WIRE 10'

D-500-0455-2-612-078

CABLE IN LINE COUPLER 1WR 6.50'

10079165-N1500YYLF

CONN RCPT

D-500-0458-1-612-078-TS

CABLE IN LINE COUPLER 1WR 6.50'

D-500-0255-011

CABLE IN LINE COUPLER 1WIRE 11"

10079165-N0500YYLF

HDXS 72 PAIR 3 OUTLET

A04323N001

CABLE IN LINE COUPLER 1WR 6.50'

D-500-L458-1-612-120

CABLE IN LINE COUPLER 1WIRE 10'

About Specialized Cable Assemblies

Specialized Cable Assemblies includes application-specific interconnects, including defined bus and termination arrangements.

When selecting an assembly, check equipment reference, bus or stub arrangement, shielding, termination and exposed length.

A specialised assembly must be matched to its system drawing. A similar connector or listed overall length does not establish an equivalent bus connection.

Specialized Cable Assemblies

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

System-specific harnesses

System-specific harnesses

Match the equipment drawing and the exact termination arrangement.

Bus interface connections

Bus interface connections

Check the bus or stub arrangement and shielding requirements.

Equipment integration

Equipment integration

Verify routing, exposed length and connector details against the system design.

Replacement verification

Replacement verification

Compare the complete construction rather than assuming equivalent operation from connector shape.

Bus-to-bus coupler assemblies vs. Bus-to-open coupler assemblies

Compare the interfaces, construction and selection details of these two product options.

Bus-to-bus coupler assemblies

Representative listed part: 4-1190926-4.

  • Type Data Coupler, Bus to Bus
  • Number of Lines 2
  • Features Not specified for this example
  • Cable Length - Unexposed Not specified for this example

Bus-to-open coupler assemblies

Representative listed part: D-500-0467-4-613-078.

  • Type Data Coupler, Bus to Open
  • Number of Lines 1
  • Features Not specified for this example
  • Cable Length - Unexposed 6.50' (1.98m) 78.0"

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

How do I distinguish bus-to-bus and bus-to-open assemblies?

Use the full Type entry and the equipment drawing to identify the required end arrangement. A bus-to-open listing needs the intended final connection defined rather than being treated as an already terminated link.

Compare Number of Lines and Features with the system connection plan. Include the required coupler or stub arrangement and end details so the exact specialised assembly can be reviewed.

Refer to the field name Cable Length - Unexposed and compare it with the supplier drawing. Confirm the measurement reference and finished end arrangement before using it as an installation dimension.

A specialised assembly must be matched to its system drawing. A similar connector or listed overall length does not establish an equivalent bus connection.

4-1190926-4 is shown as bus-to-bus coupler assemblies, with Type listed as Data Coupler, Bus to Bus. D-500-0467-4-613-078 is shown as bus-to-open coupler assemblies, with Type listed as Data Coupler, Bus to Open. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare equipment reference, bus or stub arrangement, shielding, termination and exposed length. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required equipment reference, bus or stub arrangement, shielding, termination and exposed length. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details