Equipment integration
Specialized Connectors can be evaluated for equipment integration. Match mating system, contact assignment, mounting and operating requirements to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 521844-1 | CONN TERM RING 12-16AWG SCREW |
| 60812-1 | CONN TERM BRUSH 14-18AWG CRIMP |
| 553593-1 | CONN TERM STRAIN RELIEF 26-28AWG |
| 42349-1 | CONN TERM TAB 14-18AWG CRIMP |
| 350053-2 | CONN TERM PIN 26-30AWG CRIMP |
| 213648-3 | CONN TERM BUSBAR CLIP SOLDER |
| 62614-2 | CONN TERM KEYBRD SWITCH SOLDER |
| 1643906-1 | CONN TERM BUSBAR CLIP SOLDER |
| 2106710-1 | CONN TERM BUSBAR 18AWG SNAP ON |
| 606713-1 | CONN TERM POWER 600 MCM CRIMP |
| 61760-1 | CONN TERM GROUNDING 16-20AWG |
| 61684-5 | CONN TERM PIN CRIMP TAB |
| 40990-1 | CONN TERM WELD TAB 16-20AWG |
| 350056-3 | CONN TERM MULTI-TAP SCREW |
| 2170033-1 | CONN TERM BUSBAR CLIP |
| 62380-4 | CONN TERM KEYBRD SWITCH SOLDER |
| 60598-1 | CONN TERM POST RCPT 20-24AWG |
| 62588-1 | CONN TERM BRUSH 14-18AWG CRIMP |
| 5-330495-2 | CONN TERM CLIP CRIMP 31X62 |
| 1217372-1 | CONN TERM GND CLIP 14-18AWG |
| 2204018-1 | DUAL CROWN CLIP JUNIOR POWER, FL |
| 216331-2 | CONN TERM RCPT 12-14AWG CRIMP |
| 61987-1 | CONN TERM STRAIN RELIEF CRIMP |
| 40800 | CONN TERM SPARK RCPT CRIMP |
The Specialized Connectors range covers interconnection systems defined by the selected connector family and part drawing.
Compare mating system, contact assignment, mounting and operating requirements for the required installation. Use the exact mating part and installation dimensions specified for the selected item.
Review Terminal Type, Termination, Wire Gauge and Color on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Specialized Connectors can be evaluated for equipment integration. Match mating system, contact assignment, mounting and operating requirements to the equipment interface.
For module interfaces, verify Terminal Type, Termination, Wire Gauge and Color on the selected Specialized Connectors. Use the exact mating part and installation dimensions specified for the selected item.
In prototype verification, allow for the required mounting, routing or termination space. Check mating system, contact assignment, mounting and operating requirements before assembly.
For specialized connectors inspection, identify the original Specialized Connectors part number and mating arrangement. Compare Terminal Type, Termination, Wire Gauge and Color before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 2043160006
Example: 2046080001
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers interconnection systems defined by the selected connector family and part drawing. Use the exact mating part and installation dimensions specified for the selected item.
Examples in this category include Female, Receptacle (Socket), Solder Cup and Crimp On Pin. Match the selected Specialized Connectors to the required mating system, contact assignment, mounting and operating requirements.
For Specialized Connectors, check Terminal Type, Termination, Wire Gauge and Color against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check mating system, contact assignment, mounting and operating requirements for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
Use the exact mating part and installation dimensions specified for the selected item. For Specialized Connectors, identify the matching system and required assembly parts before ordering.
2043160006 specifies Terminal Type: Female, Receptacle (Socket) and Termination: Press-Fit. 2046080001 specifies Terminal Type: Female, Receptacle (Socket) and Termination: Crimp. Check the full mating and installation requirements before treating different Specialized Connectors as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include mating system, contact assignment, mounting and operating requirements and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details