icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
PAP 4/3A GR

END PLATEGREY

PAP 6/2A RD

END PLATERED

PAPIKD 2,5 GR

END PLATE MULTI-LEVELGREY

PAP 16/2A GR

END PLATEGREY

PAP 10/3A GR

END PLATEGREY

PAP 6/2A OG

END PLATEORANGE

1180923

COVER, LENGTH: 72.9 MM, WIDTH: 2

CA802

END STOP, SINGLE SCREW RETAINER.

Z5.522.8553.0

END CLAMP, SCREW CLAMP, 8MM WIDE

EPCXDL2.5

ENDPLATE CXDL2.5.

PPCMT4

ISOLATION PARTITION PLATE.

BS3PULL600/12

PIN BUSBAR ULH FOR 3P MCBS 12 MO

11861801

END SECTION, FEM12. DIN RAIL COM

EPCDL4UN/BU

END PLATE CDL4UN, BLUE. DIN RAIL

EP2.5/4UN

END PLATE. CONNECTION TYPE: SET

ASUL

#N/A.

BS3PULL600/06

PIN BUSBAR ULH FOR 3P MCBS 6 MOD

1180930

COVER, LENGTH: 84.7 MM, WIDTH: 2

12511813

M6/8.N TERMINAL. TYPE: STANDARD

16862916

SPACER SCREW WASHER EV5.

CA702

END STOP, DUAL SCREW RETAINER. D

11836816

END SECTION, GRAY, FEM6.

CA202

END STOP, HEAVY DUTY. DIN RAIL C

BS1PULL600/12

PIN BUSBAR ULH FOR 1P MCBS 12 MO

About Terminal Block Accessories

The Terminal Block Accessories range covers wire connections organised in compatible terminal-block systems.

Compare wire range, pitch, mounting, jumper system and electrical ratings for the required installation. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.

Review Type, Number of Positions, For Use With/Related Products and Color on the individual product page before choosing a part.

Terminal Block Accessories

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Control cabinets

Control cabinets

Terminal Block Accessories can be evaluated for control cabinets. Match wire range, pitch, mounting, jumper system and electrical ratings to the equipment interface.

Equipment wiring

Equipment wiring

For equipment wiring, verify Type, Number of Positions, For Use With/Related Products and Color on the selected Terminal Block Accessories. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.

Interface assemblies

Interface assemblies

In interface assemblies, allow for the required mounting, routing or termination space. Check wire range, pitch, mounting, jumper system and electrical ratings before assembly.

Terminal Block Accessories inspection

Terminal Block Accessories inspection

For terminal block accessories inspection, identify the original Terminal Block Accessories part number and mating arrangement. Compare Type, Number of Positions, For Use With/Related Products and Color before substitution.

387736402 configuration vs. LPBC1441 configuration

Compare the interfaces, construction and selection details of these two product options.

387736402 configuration

Example: 387736402

  • Type Cover
  • Number of Positions 2
  • For Use With/Related Products Beau Barrier Blocks
  • Color Black

LPBC1441 configuration

Example: LPBC1441

  • Type Cover
  • Number of Positions 1
  • For Use With/Related Products POWR-BLOKS® LD and LS Series
  • Color Clear

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Terminal Block Accessories include?

This category covers wire connections organised in compatible terminal-block systems. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.

Examples in this category include 2, 1 and 3. Match the selected Terminal Block Accessories to the required wire range, pitch, mounting, jumper system and electrical ratings.

For Terminal Block Accessories, check Type, Number of Positions, For Use With/Related Products and Color against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check wire range, pitch, mounting, jumper system and electrical ratings for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory. For Terminal Block Accessories, identify the matching system and required assembly parts before ordering.

387736402 specifies Type: Cover and Number of Positions: 2. LPBC1441 specifies Type: Cover and Number of Positions: 1. Check the full mating and installation requirements before treating different Terminal Block Accessories as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include wire range, pitch, mounting, jumper system and electrical ratings and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details