icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
279-330

END AND INTERMEDIATE PLATE; 2 MM

255-500

END PLATE; SNAP-FIT TYPE; 1 MM T

279-329

SEPARATOR PLATE; 2 MM THICK; OVE

221-502

CARRIER SCREW MNT 2POS WHITE

2002-2792

END PLATE; 0.8 MM THICK; ORANGE

209-119

FIXING SCREW; FOR 209-120 MOUNTI

870-426

TAP-OFF MODULE; MODULAR; SUITABL

288-600

TRACK SECTION SIZE 1 1 M LONG, G

790-110

CARRIER WITH GROUNDING FOOT; PAR

226-119

SPACER; FOR PLATE THICKNESS 2.5

790-101

ISOLATED MOUNTING CARRIER; FOR B

826-155

LOCKING COVER; AS REPLACEMENT; 1

288-601

LATERAL COVER SIZE 1 SMALL, GRAY

2016-7792

END AND INTERMEDIATE PLATE; 1 MM

209-114

PROTECTION COVER; TRANSPARENT

2006-1695

INTERMEDIATE PLATE; 2.9 MM WIDE;

236-200

END PLATE; 1 MM THICK; SNAP-FIT

281-407

TEST PLUG; 6 MM WIDE; NOMINAL CU

226-120

END PLATE; FOR 400 V, CUT-OUT DI

226-110

END PLATE; FOR 630 V, CUT-OUT DI

870-425

TAP-OFF MODULE; WITH ANTI-ROTATI

232-637

STRAIN RELIEF HOUSING

280-376

END AND INTERMEDIATE PLATE; 2.5

831-1038

MOUNTING ADAPTER FOR DIN-35 RAIL

About Terminal Block Accessories

The Terminal Block Accessories range covers wire connections organised in compatible terminal-block systems.

Compare wire range, pitch, mounting, jumper system and electrical ratings for the required installation. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.

Review Type, Number of Positions, For Use With/Related Products and Color on the individual product page before choosing a part.

Terminal Block Accessories

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Control cabinets

Control cabinets

Terminal Block Accessories can be evaluated for control cabinets. Match wire range, pitch, mounting, jumper system and electrical ratings to the equipment interface.

Equipment wiring

Equipment wiring

For equipment wiring, verify Type, Number of Positions, For Use With/Related Products and Color on the selected Terminal Block Accessories. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.

Interface assemblies

Interface assemblies

In interface assemblies, allow for the required mounting, routing or termination space. Check wire range, pitch, mounting, jumper system and electrical ratings before assembly.

Terminal Block Accessories inspection

Terminal Block Accessories inspection

For terminal block accessories inspection, identify the original Terminal Block Accessories part number and mating arrangement. Compare Type, Number of Positions, For Use With/Related Products and Color before substitution.

387736402 configuration vs. LPBC1441 configuration

Compare the interfaces, construction and selection details of these two product options.

387736402 configuration

Example: 387736402

  • Type Cover
  • Number of Positions 2
  • For Use With/Related Products Beau Barrier Blocks
  • Color Black

LPBC1441 configuration

Example: LPBC1441

  • Type Cover
  • Number of Positions 1
  • For Use With/Related Products POWR-BLOKS® LD and LS Series
  • Color Clear

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Terminal Block Accessories include?

This category covers wire connections organised in compatible terminal-block systems. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.

Examples in this category include 2, 1 and 3. Match the selected Terminal Block Accessories to the required wire range, pitch, mounting, jumper system and electrical ratings.

For Terminal Block Accessories, check Type, Number of Positions, For Use With/Related Products and Color against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check wire range, pitch, mounting, jumper system and electrical ratings for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory. For Terminal Block Accessories, identify the matching system and required assembly parts before ordering.

387736402 specifies Type: Cover and Number of Positions: 2. LPBC1441 specifies Type: Cover and Number of Positions: 1. Check the full mating and installation requirements before treating different Terminal Block Accessories as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include wire range, pitch, mounting, jumper system and electrical ratings and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details