icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
727-114

8-LEVEL END PLATE; PLAIN; 7.62 M

2006-931/1099-542

FUSE PLUG; WITH PULL-TAB; FOR GL

769-303

END AND INTERMEDIATE PLATE; 1.1

255-700

END PLATE; SNAP-FIT TYPE; 1 MM T

870-949

SEPARATOR PLATE; 1 MM THICK; ORA

890-502

STRAIN RELIEF HOUSING 2-POLE WIT

769-309

END AND INTERMEDIATE PLATE; 1.1

2006-931/1000-859

FUSE PLUG; WITH PULL-TAB; FOR GL

2006-991

END PLATE FOR FUSE TERMINAL BLOC

2002-401

DISCONNECT PLUG FOR CARRIER TERM

249-136

TEST PLUG MODULE; WITHOUT LOCKIN

231-393

LOCKING DEVICE; ORANGE

2000-549

SPACER MODULE; MODULAR; E.G., FO

727-107

8-LEVEL END PLATE; MARKING: 7-6-

769-301

END AND INTERMEDIATE PLATE; 1.1

2006-931/1099-541

FUSE PLUG; WITH PULL-TAB; FOR GL

890-302

MOUNTING CARRIER; 2-POLE, GRAY

2002-880/1000-411

COMPONENT PLUG; 2-POLE; WITH DIO

770-502/041-000

STRAIN RELIEF HOUSING 2-POLE WIT

870-947

SEPARATOR PLATE; 1 MM THICK; ORA

2002-880

EMPTY COMPONENT PLUG HOUSING; 10

2002-880/1000-836

COMPONENT PLUG; 2-POLE; LED (RED

770-340

SNAP-IN FRAME 5-POLE 1.0 3.0 MM

232-603

STRAIN RELIEF HOUSING; GRAY

About Terminal Block Accessories

The Terminal Block Accessories range covers wire connections organised in compatible terminal-block systems.

Compare wire range, pitch, mounting, jumper system and electrical ratings for the required installation. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.

Review Type, Number of Positions, For Use With/Related Products and Color on the individual product page before choosing a part.

Terminal Block Accessories

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Control cabinets

Control cabinets

Terminal Block Accessories can be evaluated for control cabinets. Match wire range, pitch, mounting, jumper system and electrical ratings to the equipment interface.

Equipment wiring

Equipment wiring

For equipment wiring, verify Type, Number of Positions, For Use With/Related Products and Color on the selected Terminal Block Accessories. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.

Interface assemblies

Interface assemblies

In interface assemblies, allow for the required mounting, routing or termination space. Check wire range, pitch, mounting, jumper system and electrical ratings before assembly.

Terminal Block Accessories inspection

Terminal Block Accessories inspection

For terminal block accessories inspection, identify the original Terminal Block Accessories part number and mating arrangement. Compare Type, Number of Positions, For Use With/Related Products and Color before substitution.

387736402 configuration vs. LPBC1441 configuration

Compare the interfaces, construction and selection details of these two product options.

387736402 configuration

Example: 387736402

  • Type Cover
  • Number of Positions 2
  • For Use With/Related Products Beau Barrier Blocks
  • Color Black

LPBC1441 configuration

Example: LPBC1441

  • Type Cover
  • Number of Positions 1
  • For Use With/Related Products POWR-BLOKS® LD and LS Series
  • Color Clear

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Terminal Block Accessories include?

This category covers wire connections organised in compatible terminal-block systems. These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory.

Examples in this category include 2, 1 and 3. Match the selected Terminal Block Accessories to the required wire range, pitch, mounting, jumper system and electrical ratings.

For Terminal Block Accessories, check Type, Number of Positions, For Use With/Related Products and Color against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check wire range, pitch, mounting, jumper system and electrical ratings for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

These are accessory components for a compatible connector system; confirm the supported connector series and the function of each accessory. For Terminal Block Accessories, identify the matching system and required assembly parts before ordering.

387736402 specifies Type: Cover and Number of Positions: 2. LPBC1441 specifies Type: Cover and Number of Positions: 1. Check the full mating and installation requirements before treating different Terminal Block Accessories as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include wire range, pitch, mounting, jumper system and electrical ratings and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details