icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
2296414

CONN TERM BLOCK

243620000

TERM MKL 3/12 12POS HZ TAB KRG

2280297

INTERFACE MODULE 15POS PNL MNT

1597780000

HEADER COUPLER 5.08MM 4POS OR

275320000

MKL 3/6 HORZ TAB 6POS BRN

1359660000

SLA COUPLING BLOCK 2 OG

2280271

INTERFACE MODULE 40POS PNL MNT

2302861

FRONT ADAPTERS 2 X 8 CHANNELS

2302748

ADAPTER 32 CHANNEL 50POS HEADER

2296281

FRONT ADAPTER 4 X 8 CHANNELS

1597760000

HEADER COUPLER 5.08MM 2POS OR

2290009

FRONT ADAPTER 16 CHANNELS

1597800000

HEADER COUPLER 5.08MM 6POS OR

2287135

INTERFACE MODULE 9POS PNL MNT

9915480001

RS-SIMPLEX 120VAC C/B 5A OUTL

586861001

HOLDER CARD EDGE SJGF 32S Z+B

2261054

PLUG-IN CARD BLOCK 5.08MM 32POS

FIT0851

RJ45 TERMINAL BLOCK ADAPTER - VE

1898444

TERM BLOCK PCB

2280284

INTERFACE MODULE 50POS PNL MNT

DCN4-TB4

TERMINAL BLOCK ADAPTER

2903208

CONN TERM BLOCK

9915480000

MODULE OUTLET AC SINGLE

KF1410500000G

350 TB PCB CONNECTOR

About Terminal Block Adapters

The Terminal Block Adapters range covers wire connections organised in compatible terminal-block systems.

Compare wire range, pitch, mounting, jumper system and electrical ratings for the required installation. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Review wire range, pitch, mounting, jumper system and electrical ratings on the individual product page before choosing a part.

Terminal Block Adapters

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Control cabinets

Control cabinets

Terminal Block Adapters can be evaluated for control cabinets. Match wire range, pitch, mounting, jumper system and electrical ratings to the equipment interface.

Equipment wiring

Equipment wiring

For equipment wiring, verify wire range, pitch, mounting, jumper system and electrical ratings on the selected Terminal Block Adapters. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Interface assemblies

Interface assemblies

In interface assemblies, allow for the required mounting, routing or termination space. Check wire range, pitch, mounting, jumper system and electrical ratings before assembly.

Terminal Block Adapters inspection

Terminal Block Adapters inspection

For terminal block adapters inspection, identify the original Terminal Block Adapters part number and mating arrangement. Compare wire range, pitch, mounting, jumper system and electrical ratings before substitution.

1239.3 configuration vs. 1233.3 configuration

Compare the interfaces, construction and selection details of these two product options.

1239.3 configuration

Example: 1239.3

    1233.3 configuration

    Example: 1233.3

      The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

      Frequently Asked Questions

      Practical answers to help you prepare your drawing and specifications.

      What does Terminal Block Adapters include?

      This category covers wire connections organised in compatible terminal-block systems. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

      Match the selected Terminal Block Adapters to the required wire range, pitch, mounting, jumper system and electrical ratings.

      For Terminal Block Adapters, check wire range, pitch, mounting, jumper system and electrical ratings against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

      Check wire range, pitch, mounting, jumper system and electrical ratings for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

      Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion. For Terminal Block Adapters, identify the matching system and required assembly parts before ordering.

      1239.3 specifies the part drawing. 1233.3 specifies the part drawing. Check the full mating and installation requirements before treating different Terminal Block Adapters as replacements.

      Send the manufacturer and full part number, quantity and required delivery destination. For this category, include wire range, pitch, mounting, jumper system and electrical ratings and a mating or installation drawing when a replacement is needed.

      Tell us what you need to build

      Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

      • Engineering review within 24 hours
      • NDA available before drawings are shared
      • Free samples in 5-7 days after drawing approval
      Inquiry Drawer

      Review & Submit Request

      This site uses cookies

      We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details