icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
1597940000

HEADER COUPLER 5.08MM 20POS OR

1597920000

HEADER COUPLER 5.08MM 18POS OR

1248.3

PC CARD HOLDER

1597910000

HEADER COUPLER 5.08MM 17POS OR

1613110000

HEADER COUPLER 5.08MM 10POS BK

1613160000

HEADER COUPLER 5.08MM 15POS BK

1597880000

HEADER COUPLER 5.08MM 14POS OR

1613140000

HEADER COUPLER 5.08MM 13POS BK

9915490000

MODULE OUTLET AC DUPLEX

2265034

PLUG-IN CARD BLOCK 2.54MM 64POS

1597870000

HEADER COUPLER 5.08MM 13POS OR

7940099363

IGS-3044GC

2263117

PLUG-IN CARD BLOCK 64POS 4A

2261106

PLUG-IN CARD BLOCK 32POS 4A

2263036

PLUG-IN CARD BLOCK 5.54MM 64POS

2263023

PLUG-IN CARD BLOCK 64POS 1A

ELB181100

CONN TERM BLK CARD EDGE 18POS

2269140

PLUG-IN CARD BLOCK 64POS GREEN

2261096

PLUG-IN CARD BLOCK 32POS 4A

2285603

SOCKET STRIP 48POS PNL MNT

1898457

TERM BLOCK PCB

770-609

3-WAY DISTRIBUTION CONNECTOR 5-P

ELE242110

CONN TERM BLK CARD EDGE 24POS

ELE182110

CONN TERM BLK CARD EDGE 18POS

About Terminal Block Adapters

The Terminal Block Adapters range covers wire connections organised in compatible terminal-block systems.

Compare wire range, pitch, mounting, jumper system and electrical ratings for the required installation. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Review wire range, pitch, mounting, jumper system and electrical ratings on the individual product page before choosing a part.

Terminal Block Adapters

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Control cabinets

Control cabinets

Terminal Block Adapters can be evaluated for control cabinets. Match wire range, pitch, mounting, jumper system and electrical ratings to the equipment interface.

Equipment wiring

Equipment wiring

For equipment wiring, verify wire range, pitch, mounting, jumper system and electrical ratings on the selected Terminal Block Adapters. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Interface assemblies

Interface assemblies

In interface assemblies, allow for the required mounting, routing or termination space. Check wire range, pitch, mounting, jumper system and electrical ratings before assembly.

Terminal Block Adapters inspection

Terminal Block Adapters inspection

For terminal block adapters inspection, identify the original Terminal Block Adapters part number and mating arrangement. Compare wire range, pitch, mounting, jumper system and electrical ratings before substitution.

1239.3 configuration vs. 1233.3 configuration

Compare the interfaces, construction and selection details of these two product options.

1239.3 configuration

Example: 1239.3

    1233.3 configuration

    Example: 1233.3

      The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

      Frequently Asked Questions

      Practical answers to help you prepare your drawing and specifications.

      What does Terminal Block Adapters include?

      This category covers wire connections organised in compatible terminal-block systems. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

      Match the selected Terminal Block Adapters to the required wire range, pitch, mounting, jumper system and electrical ratings.

      For Terminal Block Adapters, check wire range, pitch, mounting, jumper system and electrical ratings against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

      Check wire range, pitch, mounting, jumper system and electrical ratings for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

      Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion. For Terminal Block Adapters, identify the matching system and required assembly parts before ordering.

      1239.3 specifies the part drawing. 1233.3 specifies the part drawing. Check the full mating and installation requirements before treating different Terminal Block Adapters as replacements.

      Send the manufacturer and full part number, quantity and required delivery destination. For this category, include wire range, pitch, mounting, jumper system and electrical ratings and a mating or installation drawing when a replacement is needed.

      Tell us what you need to build

      Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

      • Engineering review within 24 hours
      • NDA available before drawings are shared
      • Free samples in 5-7 days after drawing approval
      Inquiry Drawer

      Review & Submit Request

      This site uses cookies

      We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details